Accessories, Consumables - Hilti TE 1000-AVR Operating Instructions Manual

Recommended minimum conductor cross section and max. cable lengths
Conductor cross section
Mains voltage 100V
Mains voltage 110-127 V
Mains voltage 220-240 V
en
Do not use extension cords with 1.25 mm² conductor cross section; 2.0 mm² conductor cross section.
2.12 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.13 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Accessories, consumables

Designation
TPS Theft Protection System with
Company Card, Company Remote
and TPS‑K key
Dust removal module
Use the Hilti chisels or other tools listed below. With these chisels and tools you will achieve higher
performance and longer lifetime as the power tool and chisels have been optimized as a system.
Pointed chisels
Flat chisels
Wide-flat chisels
18
1.5 mm²
30 m
Short designation
TE DRS‑B
TE‑S chuck /
tool designa- Width (mm)
tion
TE‑SP SM 36
TE‑SP SM 50
TE‑SP SM 70
TE‑SP FM 36 32
TE‑SP FM 50 32
TE‑SP FM 70 32
TE‑SP 50
SPM 5/36
TE‑SP 50
SPM 5/50
TE‑SP 80
SPM 8/36
TE‑SP 80
SPM 8/50
TE‑SP 120
SPM 12/36
TE‑SP 120
SPM 12/50
2.5 mm²
20 m
50 m
Item number, description
206999, optional
Width in
Length (mm)
inches
360
500
700
360
1¹⁄₄
500 1¹⁄₄
700 1¹⁄₄
360 2
500 2
360 3
500 3
360 4³⁄₄
500 4³⁄₄
3.5 mm²
30 m
Length in
inches
14
20
27
14
20
27
14
20
14
20
14
20