Windows 2000/Nt; Figure 2-6. Properties Dialog Box In Windows 98/95 - National Instruments NI-488.2 User Manual
National instruments user manual ni-488.2
Hide thumbs
Also See for NI-488.2:
- User manual (134 pages) ,
- Installation manual (13 pages) ,
- Getting started (7 pages)
Table of Contents
Advertisement
Chapter 2
Measurement & Automation Explorer
Windows 2000/NT
NI-488.2 User Manual for Windows
The Properties dialog box appears. Figure 2-6 shows the Properties
dialog box for an AT-GPIB/TNT (Plug and Play) interface.
Figure 2-6. Properties Dialog Box in Windows 98/95
If you need more information about a field in the Properties dialog
box, click on the ? button in the upper-right corner of the dialog box,
then click on the field.
4.
(Optional) Change the settings for your interface.
To view or change GPIB interface information, complete the following
steps:
1.
Select Start»Programs»National Instruments NI-488.2»Explore
GPIB to start Measurement & Automation Explorer.
2.
Expand the Devices and Interfaces directory by clicking on the + next
to the folder.
3.
Right-click on your GPIB interface and select Properties from the
drop-down menu that appears.
2-10
www.natinst.com
Advertisement
Table of Contents
