Windows 2000 Users - National Instruments USB Digitizers NI USB-5132 User Manual

Windows 2000 Users

You must have NI-SCOPE 3.4 or later installed on your PC.
Note
© National Instruments Corporation
Figure 7 depicts how a USB-5133 OEM device name appears in the Found
New Hardware Wizard and Windows Device Manager.
Figure 7. USB-5133 OEM Device in the Found New Hardware Wizard and
To modify the device name in the Found New Hardware Wizard and
Windows Device Manager in Windows 2000, complete the following steps.
1. Locate the
NIHSD2k.inf
where is the root directory where Windows is installed.
x:\
If you want to revert back, save a copy of this file as
NIHSD2k_original.inf
Device Manager (Windows 2000)
file in the
x:\WINNT\inf\
in a different location.
7
directory,
NI USB-5132/5133 OEM User Guide