National Instruments NI-488.2 User Manual page 119

EOS or EOS Byte
EOT
ESB
F
FIFO
G
GET
GPIB
GPIB address
GPIB board
GTL
H
handshake
© National Instruments Corporation
A 7- or 8-bit end-of-string character that is sent as the last byte of a data
message.
End of transmission.
The Event Status bit. Part of the IEEE 488.2-defined status byte which is
received from a device responding to a serial poll.
First-in-first-out.
Group Execute Trigger. The GPIB command used to trigger a device or
internal function of an addressed Listener.
General Purpose Interface Bus is the common name for the
communications interface system defined in ANSI/IEEE
Standard 488.1-1987 and ANSI/IEEE Standard 488.2-1992.
The address of a device on the GPIB, composed of a primary address
(MLA and MTA) and perhaps a secondary address (MSA). The GPIB
board has both a GPIB address and an I/O address.
Refers to the National Instruments family of GPIB interfaces.
Go To Local. The GPIB command used to place an addressed Listener in
local (front panel) control mode.
The mechanism used to transfer bytes from the source handshake function
of one device to the acceptor handshake function of another device. DAV,
NRFD, and NDAC, three GPIB lines, are used in an interlocked fashion to
signal the phases of the transfer, so that bytes can be sent asynchronously
(for example, without a clock) at the speed of the slowest device.
For more information about handshaking, refer to the ANSI/IEEE Standard
488.1-1987.
G-3
Glossary
NI-488.2 User Manual for Windows