View Gpib Instrument Information; Table; Figure 2-7. Gpib Configuration Utility In Windows Nt - National Instruments NI-488.2 User Manual
National instruments user manual ni-488.2
Hide thumbs
Also See for NI-488.2:
- User manual (134 pages) ,
- Installation manual (13 pages) ,
- Getting started (7 pages)
Table of Contents
Advertisement
View GPIB Instrument Information
© National Instruments Corporation
The GPIB Configuration dialog box appears. Figure 2-7 shows the
GPIB Configuration dialog box for an AT-GPIB/TNT (Plug and
Play) interface in Windows NT.
Figure 2-7. GPIB Configuration Utility in Windows NT
4.
Select your GPIB Board and click on the Configure button.
5.
(Optional) Change the settings for your interface.
For more information about changing the settings for your interface, click
on the Help button.
To view information about your GPIB instruments, complete the following
steps:
1.
If you have not already done so, scan for connected instruments as
described in the
Scan for GPIB Instruments
chapter.
2.
Select Start»Programs»National Instruments NI-488.2»Explore
GPIB to start Measurement & Automation Explorer.
3.
Expand the Devices and Interfaces directory by clicking on the + next
to the folder.
4.
Select your GPIB interface.
Measurement & Automation Explorer displays the connected
instruments in the right window pane. Table 2-1 describes the
Chapter 2
2-11
Measurement & Automation Explorer
section earlier in this
NI-488.2 User Manual for Windows
Advertisement
Table of Contents
