Table 6-4. Auxiliary Functions In Interactive Control - National Instruments NI-488.2 User Manual

Table 6-3. Syntax for Multi-Device NI-488.2 Calls in Interactive Control (Continued)
Syntax
ReceiveSetup address
ResetSys addrlist
Send address buffer eotmode
SendCmds buffer
SendDataBytes buffer eotmode
SendIFC
SendList addrlist buffer eotmode
SendLLO
SendSetup addrlist
SetRWLS addrlist
TestSRQ
TestSys addrlist
Trigger address
TriggerList addrlist
WaitSRQ
Function
set udname
set 488.2 v
help
help option
!
-
© National Instruments Corporation

Table 6-4. Auxiliary Functions in Interactive Control

Select active device or interface where
new device or interface (for example,
initially to open each device or interface.
Start using multi-device NI-488.2 calls for interface
Display the Interactive Control utility online help.
Display help information about
auxiliary call (for example,
Repeat previous function.
Turn OFF display.
Description
Receive setup
Reset multiple devices
Send data to a device
Send command bytes
Send data bytes
Send interface clear
Send data to multiple devices
Put devices in local lockout
Send setup
Put devices in remote with lockout state
Test for service request
Cause multiple devices to perform self-tests
Trigger a device
Trigger multiple devices
Wait for service request
Description
udname
or
dev1 gpib0
, where
option
or
help ibwrt help set
6-9
Chapter 6 Interactive Control Utility
is the symbolic name of the
). Call or
ibfind
.
v
is any NI-488.2 or
option
).
NI-488.2 User Manual for Windows
ibdev