Installation; Figure 2-1. Ni-488.2 Software For Windows Cd Autorun Screen; Installing Ni-488.2 - National Instruments GPIB Series Getting Started

Installation

Note If you have a GPIB-ENET instead of a GPIB-ENET/100, refer to Getting Started
with Your GPIB-ENET and NI-488.2 for Windows Me/98/95 for installation instructions.

Installing NI-488.2

© National Instruments Corporation
This chapter describes how to install NI-488.2 for Windows Me/98/95 and
the GPIB-ENET/100.
Before you install the GPIB-ENET/100 hardware, complete the following
steps to install the NI-488.2 software:
1. Insert the NI-488.2 for Windows CD.
2. When the NI-488.2 Software for Windows screen appears, click the
Install NI-488.2 Software for Windows item, as shown in Figure 2-1.

Figure 2-1. NI-488.2 Software for Windows CD Autorun Screen

2-1 GPIB-ENET/100 for Windows Me/98/95
2