Table 6-3. Syntax For Multi-Device Ni-488.2 Calls In Interactive Control - National Instruments NI-488.2 User Manual

Chapter 6 Interactive Control Utility
Table 6-2. Syntax for Board-Level Traditional NI-488.2 Calls in Interactive Control (Continued)
Syntax
ibsic
ibsre v
ibstop
ibtmo v
ibwait mask
ibwrt wrtbuf
ibwrta wrtbuf
ibwrtf flname

Table 6-3. Syntax for Multi-Device NI-488.2 Calls in Interactive Control

Syntax
AllSpoll addrlist
DevClear address
DevClearList addrlist
EnableLocal addrlist
EnableRemote addrlist
FindLstn padlist limit
FindRQS addrlist
PassControl address
PPoll
PPollConfig address dataline
lineSense
PPollUnconfig addrlist
RcvRespMsg count termination
ReadStatusByte address
Receive address count termination
NI-488.2 User Manual for Windows
Send interface clear
Set/clear remote enable line
Abort asynchronous operation
Change/disable time limit
Wait for selected event where
of mask bit mnemonics, such as
Write data
Write data asynchronously
Write data from a file where
Serial poll multiple devices
Clear a device
Clear multiple devices
Enable local control
Enable remote control
Find all Listeners
Find device asserting SRQ
Pass control to a device
Parallel poll devices
Configure device for parallel poll
Unconfigure device for parallel poll
Receive response message
Serial poll a device
Receive data from a device
Description
is a hex or decimal integer or a list
mask
ibwait TIMO CMPL
is pathname of file to write
flname
Description
6-8 www.natinst.com