National Instruments Xmath Interactive Control Design Module ICDM User Manual page 121

Appendix A Using an Xmath GUI Tool
Interacting with a GUI Application
Xmath Interactive Control Design Module
Figure A-1. Programmable GUI Examples
Each demo has a Help menu in its menu bar, near the upper right side of the
window. The Help messages explain how to interact with the demo and
what it does. It may be helpful to read the rest of this appendix before
(or while) you try the demos.
You can exit a demo by selecting the Special»Exit option.
This section describes the mechanics of interacting with GUI windows.
Tools that use the GUI will create windows that contain, control elements
such as buttons, sliders, pull-down menus, plots, and lists. For example,
Figure A-2 shows the Programmable GUI (PGUI) Example Do It dialog.
A-2 ni.com