Mounting Height & Clearance - Zephyr Cache CCA-E30ASX Use, Care & Installation Manual

10-23/64"
Min 24"-Max 32"
36"
DUCTING
duct work must be used to maintain maximum air
used with the 1000 cfm external blower.
Always use rigid type metal ducts only. Flexible
Use calculation (on page 5) to compute total
available duct run when using elbows, transitions
and caps.
ALWAYS, when possible, reduce the number or
transitions and turns. If long duct run is required,
used, install a long reducer instead of a pancake
reducer. Reduce duct size as far away from
opening as possible.
If turns or transitions are required; install as far
away from opening and as far apart, between 2,
as possible.
Minimum mount height between range top and
Maximum mount height should be no higher than
It is important to install the hood at the proper
mounting height. Hoods mounted too low could
mounted too high will be hard to reach and will
If available, also refer to range manufacturer's
height clearance requirements and recommended
96"
hood mounting height above range.
Vertical:
Horizontal:
No horizontal option available for external blower
6
www.zephyronline.com