Getting Started; Connecting The Base - Motorola O2 Quick Start Manual

2.

Getting started

A.

Connecting the base

1. Plug the telephone line cord into the socket marked
the base and the other end of the line cord into the telephone line wall jack.
2. Plug the AC power jack into the socket marked
base and plug the AC adaptor into the AC power outlet. The green Power/In
use light comes on and you will hear a confirmation tone.
B. Installing and charging the handset
1. Plug the AC power jack into the socket marked
charger cradle and plug the AC adaptor into the AC power outlet.
2. The 750mAh Ni-MH battery pack is pre-installed. If you are charging the
batteries for the first time, place the handset on the charger cradle to
charge for at least 16 hours continuously.
3. When the handset is fully charged,
display. The display will show the time and handset number (e.g. 2) to
indicate that it is registered to the base.
Important
Warning! Use only the approved rechargeable Ni-MH battery pack (750mAh
Ni-MH rechargeable battery pack) supplied with your O2.
P
on the underside of the
P
on the underside of the
icon will appear steady on the
4
l
on the underside of