GRAPHTEC CE-3000-120 AP User Manual page 8

Thank you for choosing a Graphtec CE3000-120AP cutting plotter. This cutting plotter employs a digital servo
drive system to achieve high-speed and high-precision cutting operations. Besides cutting apparel paper and
other media, it can also be used as a pen plotter.
To ensure good cutting quality and optimum productivity, be sure to read this User's Manual thoroughly
before use.
(1) Specified rating
(2) Watch out for electrical shock
(3) Prevent dust or metallic matter from adhering to the power supply connector.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or
by any means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your
sales representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish
to make other comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability
for damages resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.
Preface
Preface
vii