Cd-Rom Drive; Cautions - PRIMERGY BX600 S2 Hardware Manual

Chapter 3 Standard Operations

3.5 CD-ROM Drive

This manual describes the points to note when handling a CD-ROM drive or CD-
ROM.
For details about inserting/ejecting the CD-ROM, refer to the manual supplied with
the CD-ROM drive.
This server does not support CD-R/RW write.

3.5.1 Cautions

Note the following points when handling CD-ROM drives or CD-ROMs to prevent failure.

■ CD-ROM drive

• Do not use in a humid or dusty place. Also, pouring liquids such as water or inserting metal objects
such as clips into the drive may cause a device failure, fire, or electric shock.
• Use the device on a shock-and-vibration free surface.
• Do not insert anything but specified CD-ROMs in the CD-ROM tray.
• Do not use force to pull out or press in the CD-ROM.
• Do not disassemble the CD-ROM drive unit.
• Clean the CD-ROM tray before use. Use a dry cloth to clean the CD-ROM tray.
• If out of use for a long period of time, in order to prevent an accident eject the CD-ROM from the
CD-ROM drive. Also to prevent dust getting into the CD-ROM drive unit keep the CD-ROM tray
closed.
■ CD-ROM
• When removing a CD-ROM from its case press on the centre of the case as shown below.
• Hold the rim of the CD-ROM and do not touch the surface.
• Do not allow fingerprints, oil or dust on the surface of the CD-ROM. If the CD-ROM becomes dirty
wipe it using a soft dry cloth wiping from the inside towards the outside. Do not wipe using benzene,
paint thinner, water, record spray, static guard, or silicon cloth.
• Be careful not to scratch the surface of the CD-ROM.
• Do not apply heat.
• Do not bend the CD-ROM or place heavy objects on it.
• Do not or apply ball-point pen or pencil to the printable side of the CD-ROM.
30