Chapter 6 Technical Information
6.1 Specifications
This section describes the specifications of the chassis and optional devices.
6.1.1 Server Specifications
The specifications for the chassis are shown in the table below.
For details about blades and peripheral devices, refer to the applicable User's Guide.
Item
Product ID
Server blade
Switch Blade
GbE Pass-Thru Blade
BladeSlot
Management Blade
FC Pass-Thru Blade
KVM Module
(Adv.KVM Module (option))
*1
External I/O port
Keyboard / Mouse
Dimension (Width × Depth × Height)
Weight
*2
Power consumption
Power supply
PSU
Redundant fan
*1: Switch the KVM inputs/outputs for 10 server blades and use them.
*2: Power consumption is the maximum power consumption of the PSUs.
The specifications for this chassis are subject to be updated without any notice. Please be forewarned.
64
Redundancy
Hot plug
Redundant
Hot plug
Redundant
Hot plug
Redundant
Hot plug
Redundant
Hot plug
Redundant
Hot plug
Keyboard, mouse, video, LAN × 1 (when adv.KVM module is installed),
Third and fourth units have redundant power (Hot-plug compatible)
Functions and Specifications
PGUR3SC2
Maximum 10 units
No
Yes
Standard: 0 (Max.: 4)
Depending on network configuration
Yes
Standard: 0 (Max.: 4)
Depending on network configuration
Yes
Standard: 2 (Max.: 2)
Yes
Yes
Standard: 0 (Max.: 2)
Depending on network configuration
Yes
Standard: 1 (Max.: 1)
No
No
SCSI × 2 (when SCSI module is installed)
Option
446 × 735 × 308 mm (7U)
Maximum 130 kg (server blade installation)
Max. 5600W (20160kJ/h)
Input voltage: 200–240V AC (50/60Hz)
Output voltage: maximum 2100W
Standard: 2, Max.: 4
System fan unit (fan × 2) × 2
PSU (fan × 3)
Dummy PSU (fan × 3)