Seagull Models X-RAY Assembly Manual page 3

Table of Contents

Advertisement

TOOLS & SUPPLIES NEEDED.
!
Thick cyanoacrylate glue.
!
30 minute epoxy.
!
5 minute epoxy.
!
Hand or electric drill.
!
Assorted drill bits.
!
Modelling knife.
!
Straight edge ruler.
!
2mm ball driver.
!
Phillips head screwdriver.
!
220 grit sandpaper.
!
90° square or builder's triangle.
!
Wire cutters.
!
Masking tape & T-pins.
!
Thread-lock.
!
Paper towels.
Please contact Horizon Hobby for product support
and technical assistance at 877-504-0233.
Replacement parts are available from your local
dealer or through Horizon Hobby.
HORIZON HOBBY DISTRIBUTIONS INC
4105 Fieldstone Rd, Champaign, IL 61822-USA
www.seagullmodels.com
NOTE: To avoid scratching your new aero-
plane we suggest that you cover your
workbench with an old towel. Keep a
couple of jars or bowls handy to hold
the small parts after you open the
bags.
Please trial fit all parts. Make sure you
have the correct parts and that they
fit and are aligned properly before
gluing! This will ensure proper as-
sembly as the X-RAY is made from
natural materials and minor adjust-
ments may have to be made.
The paint and plastic parts used in
this kit are fuel proof. However, they
are not tolerant of many harsh chemi-
cals including the following: paint
thinner, cyano-acrylate glue accel-
erator, cyanoacrylate glue de-bonder
and acetone. Do not let these chemi-
cals come in contact with the colours
on the covering and the plastic parts.
3

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-RAY and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents