Aastra 6735i User Manual page 29

CLIR
CLIR
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the same phone.
Enquiry call during a call
You want to call someone else briefly without losing your current call partner. Then
you want to resume your conversation with your original call partner.
With the Enquiry function you can call someone else in the middle of a call and put
your original call partner on hold. You can make enquiry calls to both internal and
external users.
<Call number>
Drop
Pickup
Aastra 6735i/6737i/6755i/6757i
eud-1619/1.1 – R3.0 – 12.2013
Activates/deactivates calling line identification restriction permanently:
Press the function key for CLIR.
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Activate CLIR per call:
1. Press the function key for CLIR.
2. Enter the call number and press the
➔
Call number is dialled and your own number is not displayed to the called party.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold and the LED on the line key flashes.
Take back the call party on hold:
Press the Hold key or the line key.
➔
The call is active again.
Initiate an enquiry call (you are making/taking a call):
Press a free line key (select using the vertical navigation key, if necessary).
Enter the call number and press the
➔
Enquiry call party is called; first call partner is on hold.
Note:
If the other user does not answer, you can cancel the enquiry call with the Cancel
softkey or with the End key and take back the first call with the flashing line key.
To end the enquiry call:
Press the Drop softkey or the End key.
To retrieve the first parked call party:
Press the Pickup softkey or the flashing line key.
Select softkey.
Dial softkey.
Phoning
29