Brother DB2-DD7100A Instruction Manual page 65

No.1 Normal lock stitch
Thread trimming activated by reversing treadle.
No.5 Fixed stitch sewing only
Fixed stitch
Thread trimming activated by reversing treadle.
No.9 Fixed stitch and thread
trimming
No.13 Name label only
Thread trimming activated by
reversing treadle.
● ....... Thread trimming (Thread trimming will be performed when the treadle is pressed to the reverse position.)
※ ...... Indicated thread trimming following fixed stitch sewing or end backtack. (Thread trimming will be performed with-
out pressing the treadle to the reverse position.)
No.2 Start backtack
No.6 Start backtack and fixed stitch
sewing
Fixed stitch
No.10 Start backtack, fixed stitch and
thread trimming
Sewing completed through thread trimming by holding treadle depressed.
No.14 Name label, end backtack and
thread trimming
※
Thread trimming activated after end
backtack.
DB2-DD7100A
6. USING THE B-40 OPERATION PANEL
6. VERWENDUNG DER BEDIENUNGSTAFEL B-40
6. UTILISATION DU PANNEAU DE COMMANDE B-40
6. USO DEL TABLERO DE CONTROLES B-40
No.3 End backtack
Thread trimming activated after end backtack by reversing treadle.
No.7 Fixed stitch sewing and end
backtack
Fixed stitch
Thread trimming activated after end backtack by reversing treadle.
No.11 Fixed stitch, end backtack and
thread trimming
No.15 Pleat presser sewing
Thread trimming activated by
reversing treadle.
No.4 Start/end backtack
No.8 Start/end backtack and fixed
stitch sewing
Fixed stitch
No.12 Start/end backtack, fixed stitch
and thread trimming
No.16 Continuous backtack
※
Sewing completed through thread
t r i m m i n g b y h o l d i n g t r e a d l e d e -
pressed.
46