Fuji Xerox ApeosPort-V 4020 Quick Reference page 25

No. Component
8 Tray 5 (bypass tray)
9 Tray 1 to 4
10 Toner cartridge
11 Drum cartridge
12 Front cover
 Left side and rear views of the machine
10
9
No. Component
1 USB 2.0 interface connector
2 PHONE connector
3 LINE connector
4 USB 2.0 interface connector
5 10BASE-T/100BASE-TX
connector
6 Security slot
7 USB 2.0 interface connector
8 Duplex module
9 Second BTR
10 Fusing unit
11 Power connector
Used for loading non-standard paper, such as thick-stock paper and other
special media, that cannot be loaded in Trays 1 to 4.
Load paper here.
Note • Trays 2 to 4 are optional.
Contains toner.
Contains a photoconductor.
Open this cover to replace consumable and clean the machine.
13
12
11
8
Connects to a USB memory device.
Enables you to connect the machine to a telephone device.
Do not connect any device (fax system) other than a telephone.
Use this connector to connect to a telephone line.
Note • ISDN is not supported.
Connects to the 3Gnet-BOX (optional).
Connects to a network cable. To use this as a Gigabit Ethernet interface
connector (1000BASE-T), install the Gigabit Ethernet Kit (optional).
The Kensington lock (optional) can be attached to the machine.
Connects a USB memory cable for printing.
Automatically prints or copies on both sides of paper.
Transfers toner to paper.
Fuses toner to paper.
Important • Do not touch this unit as it is extremely hot.
Connects to the power code.
Machine Components
Function
Function
*
*
2
1
2
3
4
5
6
7
25