Fuji Xerox ApeosPort-V 4020 Quick Reference page 100

6 Troubleshooting
The entire output
is faint.
Paper becomes
wrinkled.
Text is blurred.
6
White patches
appear vertically.
Paper feed
direction
Text or images
are printed at an
angle.
100
Symptom
When Tray 5 is used, the size
and type of the loaded paper
are different from the
settings on the print driver.
Two or more sheets may be
fed simultaneously.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
The drum cartridge has
deteriorated or is damaged.
No toner remains in the toner
cartridge.
The paper guides in the paper
tray are not set in the correct
positions.
Cause
Load paper of the correct type and size into
Tray 5.
Refer to "Loading Paper in Tray 5 (Bypass Tray)" (P.67).
Fan the paper well and load it again.
If the problem persists, clean the feed rollers
of the paper tray.
Refer to "Loading Paper" (P.65) .
Replace the paper with new one.
Refer to "Loading Paper" (P.65).
Replace the paper with new one.
Refer to "Loading Paper" (P.65).
Replace the drum cartridge with a new one.
Refer to "Replacing Drum Cartridges (for Customers
Having a Spot Maintenance Contract)" (P.79).
Replace the toner cartridge with a new one.
Refer to "Replacing Toner Cartridges" (P.77).
Adjust the horizontal and vertical paper
guides to the correct positions.
Refer to "Loading Paper" (P.65).
Remedy