Step 4 Starting The Fax Job - Fuji Xerox ApeosPort-V 4020 Quick Reference

Step 4 Starting the Fax Job

The following describes how to start a fax job.
1
Press the <Start> button.
Important • If the document has been loaded in the
Note
 If you have more documents
If you have more documents to fax, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to send the documents as one set of
data.
2
While documents are being scanned, select
[Next Original].
Note
3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat steps 3 and 4.
5
When all documents have been scanned, select
[Send (Last Original)].
document feeder, do not hold down the
document while it is being conveyed.
• Depending on the settings, the screen to re-
enter the recipient may be displayed after
pressing the <Start> button. In this case, re-
enter the recipient.
• If a problem occurs, an error message
appears on the touch screen. Solve the
problem according to the message.
• When using the document feeder, load the
next document after the machine has
finished scanning the first document.
• You can change the scan settings of the next
document by selecting [Resolution], [Original
Size] and [Lighten/Darken] that are displayed
after selecting [Next Original].
• When this screen or the preview screen is
displayed and the time of [Auto Clear] lapsed
without any operation, you can set whether or
not to continue the job.
機械確認
認証 ジ ョ ブ確認
(メーター確認)
2 3
ポーズ
リセッ ト
5 6
ストッ プ
割り込み
短縮
スタート
8 9
クリア
0 C
＃
主電源 データ エ ラー
<Start> button
Fax Procedure
節電
3
47