Removing Electronic Expansion Valve Coil - Hitachi RAS-(3-6)HVNC1(E) Service Manual

10 Servicing
10.2.7 Removing electronic expansion valve coil
1 Remove the pipe cover following Removing pipe cover.
2 Remove 3 fixing screws and remove the upper cover.
3 Remove the front cover following Removing front cover.
4 Remove the electrical box cover.
5 Remove 7 fixing screws and remove the side cover.
6 Remove the CN5A connector on the control PCB of the
electrical box.
7 Hold and disconnect the coil of the expansion valve. The expansion
valve coil is equipped with a lock mechanism. Ensure that the coil
is locked when replacing.
1 One terminal cover screw
Side cover
2
Seven side cover screws
3
Three front cover screws
4
358
SMGB0087 rev.0 - 12/2013
1 Expansion valve coil
Expansion valve body
2
CN5A connector
(white)