Hitachi RAS-(3-6)HVNC1(E) Service Manual page 58

2 Unit Installation
  
Wind guard
Specifications
Model
Quantity 1 per unit
Galvanized sheet metal +
Material
baked painting
Color Gray (1.0Y8.5/0.5)
Weight 5.5 kg
Fixing screw
Accessories x 4 [M5 (SUS) x 12]
Installation manual
Installation "Guard net" "Air flow guide" or "Snow protection
restriction hood" is not available to install with Wind guard
Attaching example of air wind guard
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
If the air guide is installed without discharge grille it may cause injury due to rotating fan.
44
SMGB0087 rev.0 - 12/2013
WSP-335A
1
2
2
1
1
Mounting dimension
2
Air flow
3
3 4xØ7
3