Test Run Procedure Using The Remote Control Switch (Pc-Arf) - Hitachi RAS-(3-6)HVNC1(E) Service Manual

7 Test run
7.3 Test run procedure using the remote control switch (PC-ARF)
Display Part
Fan Speed Indicator
Operation Mode
Indicator
The indications of "HEAT"
and "AUTO" are indicated
only for the heat pump type
models.
Operation Guide
Indicator
"Central Control" is
indicated while the remote
control operation is
prohibited.
Run Indicator
It lights while the unit is
operated, and it flashes in
an abnormal conditions.
RUN/STOP Switch
Operation Part
1 Turn ON the power supply for all the indoor units.
2 For the models with the auto-address function, wait for 3 minutes approximately. The addressing is automatically per-
formed. (There is a case that 5 minutes is required according to the setting condition.) After that, select using language
from "Menu". Refer to the operation manual for details.
3 Press and hold " " (menu) and " " (return) simultaneously for at least 3 seconds.
196
SMGB0087 rev.0 - 12/2013
Room Name
Indicator
Meeting Room
A/C
MODE SPEED LOUV.
COOL
HIGH
Motion Sensor is activated
LOUV. ADJ
OK
Arrow Key
Schedule Timer Indicator
It is indicated when the schedule timer
Swing Louver
Indicator
It is indicated when the operation lock
It is indicated at the set period for filter
FLTR
TEMP
?
Enter Key
function is set.
Operation Lock Indicator
function is set.
FLTR
Filter Sign Indicator
cleaning.
Setting Temperature
Indicator
Motion Sensor Indicator
It is indicated only for the air
panel with motion sensor.
Menu Switch
To display Menu.
Help Switch
To display Help Menu.
Return Switch
To return to the previous
screen.