Automatic Altitude Adjustment During Bike Transport; Setting The Altitude Gain Uphill - VDO MC 2.0 WL Instruction Manual

DE ENG FR IT ES
If AIR PReSSURe is selected:
AIr PrESSUrE--SET PrESSUrE appears on the
display. The air pressure number flashes.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
Dimension of Air Pressure is hPa.
6.12 Adjusting the altitude when transporting the bike
The MC 2.0 has a movement sensor. If the bike is transported with
the MC 2.0 (e.g. by car), the movement sensor will adjust the current
altitude if the air pressure changes during transportation.

6.13 Setting the altitude gain uphill

The altitude gain uphill can be separately set for BIKE 1 and BIKE 2.
Before the start of the season, you can reset the total altitude gain
to zero.
ATTENTION: the total altitude gain is SAVED when the battery is
changed. The data is not lost.
70 MC 2.0 WL
NL PL
to reduce the value or P to increase
VDO CYCLECOMPUTING
AIr PrESSUrE--SET OK?
Press
M to
The MC 2.0 confirms by displaying ACTUAL ALTI--SET DOnE.
To exit settings mode, press and hold the
CLOSE SETTInG flashes. The MC 2.0 switches back to function mode.
To do this, the MC 2.0 WL must be positioned in the handlebar bracket.
Process:
Press and hold M for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
Press
Press
M in confirmation.
C button for three seconds.
P to scroll to ALTI UP---SET---.
in confirmation.
M