Selection Of Bike 1 Or Bike - VDO MC 2.0 WL Instruction Manual

TIMe ABOVe: shows the time during which the
cadence was above the upper limit set for the
training zone.
STOPWATCH: independent stopwatch for
measuring times/intervals.

3.7 Selection of BIKE 1 or BIKE 2

Your VDO computer can be used on two bikes. If you want to change
from bike 1 to bike 2, the computer detects the transmitter for bike 2.
The computer then automatically switches to bike 2. All data is
now saved for bike 2. If you return to using the computer on bike 1,
transmitter 1 is detected. The computer automatically switches to
bike 1. The data is now saved for bike 1.
CLOCK: shows the current time.
12 hour AM/PM or 24 hour-mode possible.
The selected bike 1 or 2 is shown at the bottom left of the display (
Note: the transmitter on bike 2 must have been set to bike 2 before
using it the first time.
>>> P02
www.vdocyclecomputing.com
PL NL ES IT FR
MC 2.0 WL
ENG DE
>>> P02
).
51