Setting The Odometer - VDO MC 2.0 WL Instruction Manual

CLOCK---SET MInUTES appears on the display.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
6.7. Setting the total distance
This area enables you to set the total distance cycled. The information
is separately provided for bike 1 and bike 2. At the start of the season,
you can reset the total distance cycled to zero, for example.
ATTENTION: the total distance is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold M for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
Press P to scroll to ODOMETEr---SET---.
Press in confirmation.
M
to reduce the value or P to increase
CLOCK––SET OK? query.
Press
M to The MC 2.0 confirms by displaying CLOCK--SET DOnE.
To exit settings mode, press and hold the
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
ODOMETEr ODO BIKE 1 or ODO BIKE 2 is shown on
the display.
Press ALTI
Press
ODO BIKE 1 (or 2)--SET KM or SET MILE is shown on
the display.
The first digit flashes.
Press ALTI
it. Once you have set the correct value, press
confirm your setting.
The second digit now flashes.
Press ALTI
it. Once you have set the correct value, press
confirm your setting.
Continue the setting process until all digits have
been set.
www.vdocyclecomputing.com
PL NL ES IT
M in confirmation.
C button for three seconds.
A or to make a selection.
P
M in confirmation.
A to reduce the value or P
A to reduce the value or P
FR ENG DE
to increase
M to
to increase
M to
MC 2.0 WL 65