VDO MC 2.0 WL Instruction Manual page 45

A
= ALTI
In function mode:
Altitude information is displayed.
B
If the submenu is open:
B
Scroll down in the submenu.
Press and hold ALTI for three seconds:
B
Opens the menu for recalibrating the current altitude.
In setting mode:
Scroll down within the setting modes.
B
Decrease a digit.
B
P
= P/CAD
In function mode:
Displays the heart rate information and the stopwatch
B
(if heart rate has been paired).
Or:
B
Displays the cadence information and the stopwatch
(if cadence has been paired).
If the submenu is open: Scroll up in the submenu.
B
Press and hold Hr/CAD for three seconds:
B
Opens the menu for selecting the heart rate training zone
(if heart rate transmitter has been paired).
In setting mode:
Scroll up within the setting modes.
B
Increase a digit.
B
= BIKe
Displays the bike functions, e.g. trip distance, average speed etc.
B
M
+ = BIKe+MeNU
Press the buttons BIKE+MEnU (hold for three seconds) to open
B
the menu for selecting the transmitter for heart rate or cadence.
A P
+ = ALTI+P
Press the buttons ALTI+P to start/stop the stopwatch.
B
The stopwatch immediately appears on the display and
B
is started or stopped.
C
+ = BIKe+CLeAR
Press the buttons BIKE+CLEAr to activate the display backlight.
B
When the display backlight is activated, the LIGHT icon
B
displayed.
When the display backlight is activated, the display is lit for a few
B
seconds every time a button is pressed.
ATTENTION: press the buttons BIKE + CLEAR again to switch off the
display backlight during the day.
This SAVES BATTERY POWER.
www.vdocyclecomputing.com
PL NL ES IT FR
MC 2.0 WL
ENG DE
is
45