Creating An Overlay File - Toshiba e-Studio 352 Printing Manual

7
Press the [RELEASE] button.
Printing starts.
The printing status can be confirmed on the print job list.
When you want to change the number of sets
When you want to change the number of sets, press the [EDIT] button and key in the
desired number. Then press the [RELEASE] button to start printing.

Creating An Overlay File

You can print a document as an overlay file. The created overlay file can then be merged into
another document during printing.
P.259 "Printing with an Overlay File"
If the print job has several pages in the document, only the first page of the document will be
saved as an overlay file.
Both the overlay file and the documents on which you superimpose the overlay image must
be created at the same size, and orientation.
When creating an overlay file using the PS3 printer driver from an application that can create
the PS command directly, the overlay file will not be created properly. In that case, disable
the "Use PostScript Passthrough" option in the PostScript Settings dialog box.
P.231 "PostScript Settings"
Printing a document as an overlay file
1
Display the Print Job tab and select "Print to Overlay File".
Printing with Extended Print Functionality 243