Install Front And Barrier Screen; Install Handset Wall Holder - Valor MADRONA MF28JN Installation & Owner's Manual

Install Front and Barrier Screen

When installing the front of the stove make sure you
install as well the barrier screen provided with the cast
stove body.
Show the customer how to remove the barrier screen
and how to access the controls.
Follow the instructions provided with the stove cast
body and leave those instructions behind for the
customer's further reference.

Install Handset Wall Holder

The remote ontrol kit for this fi replace comes
complete with a wall-mounted holder. This
holder is not required in all installations but
is provided as an optional feature for those
customers who wish to mount the remote
handset to the wall. To install the holder
to the wall, fi nd a convenient location and
use the hardware provided with the kit.
See the diagram for required hardware and
confi gurations. Note that the holder can be
installed at the base of a light switch plate.
IMPORTANT: The location of the remote
control handset is important to assure proper
temperature regulation. To obtain a constant
temperature, we recommend that the handset should be between 3 and 15 feet away from the appliance but not
directly above it. We also advise that the handset should be located away from any other heat source and not in
direct sunlight as this may affect the temperature sensor located in the remote handset.
Installation
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
QUALIFIED
INSTALLER
Alternative 2 Alternative 3
Switch Plate
37 37