Using Bluetooth To Transfer Data - SoftBank 706N User Manual

Connecting from a Device to the Handset
A Press c and select
Connectivity → Bluetooth
B Press M (OPTIONS) and select Pairing Standby
C Request a connection from the device
11
Tip
• The timeout time can be set in Pairing Timer under Timeout Settings.
If a connection is not established within the specified time, the
pairing standby mode is canceled, and
window.
• When pairing, the Device Passkey may be required to be entered.

■ Using Bluetooth to Transfer Data

Use Bluetooth to transfer vCard-formatted Phone Book data.
Some devices must be registered before data is sent. However,
registration may not be required depending on the other party's device
such as 706N.
Sending Data
A Set the receiving device to standby
11-4
(Settings) →
disappears from the
B Highlight Phone Book data to send, press M
(OPTIONS) and select Send Phone Book → Send
vCard Via B.T.
C Select the receiving device from the device list
Data is sent.
Tip
• Data that can be sent
Only one Phone Book entry can be sent. To send another entry, repeat sending.
• The Device Passkey may be required to be entered even if the device
is already registered.
• The device list displayed in Step 3 shows the latest information on
devices regardless of the registration.
Receiving Data
A Press c and select
Connectivity → Bluetooth
B Select Discoverable to set the handset to standby
C Start the transfer operation on the sending device
D After receiving the data, press M (YES) to save the
data to the Phone Book
(Settings) →