Handset Codes
Security Code, Center Access Code and Network Password are required
to use/access some functions/services. For details on handset codes,
contact Customer Service (zp.19-43).
■ Security Code
Security Code is required to access some handset functions. The code is
"9999" by default.
• Security Code can be changed from the handset (zp.12-2).
• When Security Code is entered, asterisks appear.
• An error message appears if Security Code is entered incorrectly.
■ Center Access Code
Center Access Code is the four-digit number, assigned when you
subscribed to the service. The code is required to set optional services
from a landline or to subscribe to Web fee-based information services.
■ Network Password
Network Password is a pre-assigned four-digit number, required to restrict
handset services. After three consecutive incorrect password entries, Call
Barring settings are locked and you need to change Network Password
and Center Access Code. To change Center Access Code, contact
Customer Service (zp.19-43).
• Network Password can be changed from the handset (zp.15-10).
Note
•
Do not forget Security Code, Center Access Code and Network
Password. Also, keep these codes and password secret. SoftBank shall
not be liable for any damages caused by misuse of the codes and
password by others.
1
1-29