Connecting To Pc; Data Transfer; Setting Usb Mode - SoftBank 840N User Manual

Basics
Connect handset to a PC via USB cable to use
the following functions.
USB cable is sold separately.
●

Data transfer*

Transfer Phone Book,
Schedule and To Do List
data between handset and
a PC (P. 13-5).
Use memory card inserted
USB memory
in handset as an external
drive of a PC to read and
write data with memory
card (P. 13-5).
* USB driver must be installed in advance.
USB Driver
Install USB Driver to connect handset to a PC.
Download USB Driver from the following site
(Japanese).
http://www.n-keitai.com/guide/download/
Data Transfer
Use Data Transfer Tool to transfer data
between handset and a PC. Download Data
Transfer Tool from the following site
(Japanese).
http://www.n-keitai.com/guide/download/
● Install USB Driver before using Data Transfer
Tool.

Setting USB Mode

Set USB mode before connecting handset to
your PC via USB cable.
d d
1
Settings
d
Connection USB Mode
d
Setting
2
Communication Mode or
d
microSD Mode
Select Communication Mode for
Internet tethering (packet transmission)
or using Data Transfer Tool.
Use microSD Mode for accessing
memory card data from a PC.

Connecting to PC

Accessing Memory Card
Data from a PC
Connect handset to your PC using a USB
cable, and access memory card data from the
PC.
Set USB Mode Setting to microSD Mode in
●
advance.
1
Connect handset to your PC using
a USB cable
This enables memory card data to be
accessed from your PC.
2
When you are finished, disconnect
External
handset from the PC
Follow the procedure for safely
removing external devices (which differs
slightly according to the operating
system), when disconnecting handset
from the PC.
13
13
-5