Page 1
Introduction Thank you for purchasing the SoftBank 708SC. Note Read this guide thoroughly before using Unauthorized copying of any part of this guide 708SC to ensure proper usage. is prohibited. After reading this guide, keep it for later Contents are subject to change without prior reference.
Accessories Make sure the following accessories are included in the package with handset. These accessories are also sold separately. For details on accessories or optional items, contact Customer Service ( P.24-24). Battery AC Charger Utility Software* Stereo Earphone USB Cable (CD-ROM) Microphone *Utility Software updates/upgrades may become available via SoftBank Website (http://www.softbank.jp) without prior...
Page 9
Acoustic Shock ....... .15-5 New Call ........16-9 Side Key Silence/Reject.
Page 10
Attaching/Inserting Files ....17-14 Initiating a Call, Sending a Message, or Accessing the Web Attaching/Inserting a File from Data Folder, etc. into Message ........18-12 Field .
Page 11
Using Sound Files ..... . 22-4 20 Other Message Settings Playing Sound....... . . 22-4 Saving Sounds to Data Folder .
About This Guide In this guide, 708SC refers to SoftBank 708SC. Instructions Softkeys are described using mainly default settings. When settings Operation options appear at the bottom of Display. Press are changed, screen shots or handset responses may differ the corresponding Softkey to execute assigned functions.
Page 14
Highlighting Multi Selector Operations In this guide, "to highlight" means to move cursor to an Use Multi Selector to select menu items, move cursor, and item. scroll, etc. In this guide, Multi Selector operations are Menu Operations indicated as shown below. Basic Multi Selector Operations Main Menu/Menu operations are simplified with arrows.
Safety Precautions •Read these safety precautions before using handset. •Observe all precautions to avoid injury to yourself and others, or damage to property. •SoftBank is not liable for any damages resulting from use of this product. Before Using Handset Symbols Make sure you thoroughly understand these symbols before reading on.
Page 16
Danger Handset, Battery, & Charger Battery Use only specified battery and If battery fluid gets into your eyes, Charger ( P.i). do not rub them. Rinse with clean water and consult a doctor Using non-specified equipment may cause malfunctions, electric shock or fire due to battery leakage, overheating, immediately.
Page 17
• Charge or place battery near fire, heat sources or expose it to extreme heat ( P.i). • Use battery for other equipments. Warning Handset, Battery, & Charger Keep handset away from liquid- filled containers. Do not insert foreign objects into handset.
Page 18
Do not disassemble or modify Do not subject handset to shocks. handset. Subjecting handset or Charger to shocks may cause malfunction or injury. Should handset break, remove • Do not open the housing of handset or Charger; it may cause electric shock or injury. Contact the SoftBank battery and contact the SoftBank Customer Center, Customer Center, Customer Assistance for repairs.
Page 19
Handset Ringtone & Vibration Settings Preventing accidents Select settings carefully if you have a heart condition or wear a pacemaker/defibrillator. • For safety, never use handset while driving. Pull over beforehand. Mobile phone use while driving is During thunderstorms, turn power prohibited by the revised Road Traffic Law (Effective 1 November 2004).
Page 20
Charger Do not touch plug blades with wet hands. Use only the specified voltage. Electric shock may occur. • Non-specified voltages may cause fire or electric shock. Do not use multiple cords in one • AC Charger: AC 100V-240V Input SoftBank is not liable for problems caused by charging outlet.
Page 21
Battery Do not use AC/In-Car Charger if the cord is damaged. If battery does not charge properly, Fire or electric shock may be caused. Contact the SoftBank stop charging. Customer Assistance to replace the cord. Battery may overheat, burst or ignite. Be sure to secure In-Car Charger.
Page 22
Handset Use & Electronic Medical Turn handset power off in crowded Equipment places such as trains. People with This section is based on "Guidelines on the Use of Radio implanted pacemakers/ Communications Equipment such as Cellular Telephones defibrillators may be near. and Safeguards for Electronic Medical Equipment"...
Caution Handset, Battery, & Charger Usage Environment • Excessive dust may prevent heat release and Handset Care cause burnout or fire. • Place 708SC on stable surfaces to avoid • Avoid using 708SC on the beach. Sand may cause malfunction or injury. malfunction or accidents.
Handset Should skin irritation occur, discontinue handset use and consult Avoid leaving 708SC in extreme a doctor. heat (Inside vehicles, etc.). Skin irritation, rashes, or itchiness may result depending on Handset may heat up and lead to burns. your physical condition. Volume settings Materials &...
Page 25
Charger Do not use In-Car Charger when engine is off. Charger & In-Car Charger Start engine before use; may weaken car battery. • Grasp the plug (not the cord) to disconnect Charger. Otherwise, fire or electric shock may Disconnect AC/In-Car Charger result.
Page 26
Battery Do not dispose of exhausted batteries with ordinary refuse. Keep battery out of the reach of children. Tape over battery terminals before disposal, or bring them to a SoftBank shop. Follow local regulations regarding They may sustain injuries. And when using, do not let them battery disposal.
Page 27
If there is any abnormal odor or excessive heat, stop using battery and call the SoftBank Customer Center, Customer Assistance. Do not leave battery uncharged. Charge at least once every six months. xxvi...
General Notes General Use reduced. However, some transmissions may be overheard. •SoftBank is not liable for any damages Eavesdropping resulting from accidental loss/alteration of any Deliberate/accidental interception of data on handset/Memory Card. Please keep communications constitutes eavesdropping. separate records of Phonebook entries, etc. Inside Vehicles •Handset transmissions may be disrupted inside buildings, tunnels, or underground, or when...
Page 29
Function Usage Limits •Clean handset with a dry, soft cloth. Using alcohol, thinner, etc. may damage it. •These functions are disabled after handset •Do not expose handset to rain, snow, or high upgrade/replacement or service cancellation: humidity. Camera; Media Player. •Never disassemble or modify handset.
Page 30
Copyrights •Heavy objects or excessive pressure should be avoided. This may cause malfunction or injury. Copyright laws protect sounds, images, computer Do not sit down with handset in a back programs, databases, other materials for copyright holders. pocket. Duplicated material is limited to private use only. Do not place heavy objects on handset in a Use of materials beyond this limit or without permission of bag.
Page 31
Trademarks trademarks or registered trademarks of SOFTBANK CORP. in Japan and in other •Licensed by QUALCOMM Incorporated countries. under one or more of the following United •Yahoo! and the "Yahoo!" or "Y!" logos States Patents and/or their counterparts in are trademarks or registered trademarks of other nations: Yahoo! Inc.
Page 33
708SC, Industrial, scientific or owned by the Bluetooth SIG, Inc. and any medical equipments such as microwave use of such marks by Samsung Electronics ovens or in-house radio stations such as the is under license. Other trademarks and...
Page 34
2.In case there is a radio interference with "other radio stations," move to some other ® place or stop the Bluetooth functions (Stop emitting the radio waves) immediately. 3.If you have any questions or problems with ® Bluetooth emissions, contact SoftBank as listed below: Contact: SoftBank Customer Center From a SoftBank handset, dial 157 (toll free) for General...
SAR Certification Information 708SC meets the technical standards of Ministry of The highest SAR value for 708SC is 1.05 W/kg. This value Internal Affairs and Communications (MIC) regarding radio is obtained in accordance with the MIC testing procedure with the mobile phone transmitting at its highest wave absorption by a human body.
FCC RF Exposure Information Your handset is a radio transmitter and receiver. the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation It is designed and manufactured not to exceed the emission distance between the user's body and the back of the handset.
European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is to ensure it only uses the minimum level required to reach designed not to exceed the limits for exposure to radio the network. waves recommended by international guidelines. These The World Health Organization has stated that present guidelines were developed by the independent scientific scientific information does not indicate the need for any...
• SoftBank is not liable for damages resulting from USIM Card inserting USIM Card into IC card readers or other third party devices. • Always keep USIM Card IC chip clean. General Information & Precautions • Clean USIM Card IC chip with a soft, dry cloth. •...
Notes Inserting & Removing USIM Card • USIM Card is the property of SoftBank. • If USIM Card is lost or damaged, you will be charged Always turn power off before opening 708SC to remove for reissuing it. battery, or insert/remove USIM Card. •...
Page 43
CPush in USIM Card until it stops and Note locks • Inserting USIM Card with excessive force may damage it or 708SC. • Do not misplace a removed USIM Card. • To prevent damaging it, avoid touching the IC chip when Inserting or removing USIM Card.
Canceling PIN Lock (PUK/PUK2 Code) USIM PINs Incorrectly entering PIN or PIN2 three consecutive times USIM Card features two (4- to 8-digit) security codes: activates PIN Lock and limits 708SC function access. Enter PIN and PIN2. PUK (PIN Unlocking Key) Code to cancel PIN Lock. For more information, contact Customer Service ( P.24-24).
Handset Parts & Functions Handset sCharger/External DevicePort Internal Antenna tMicrophone aEarpiece/ Internal Camera Speaker uExternal Camera vSelf-Portrait Mirror udlr Display wMemory Card Slot yBattery Cover zStrap Eyelet Attach strap as shown.
Page 46
Earpiece/Speaker Right Softkey/Yahoo! Keitai Key Display Access Yahoo! Keitai or execute Right Softkey command/ function. Left Softkey/Mail Key Switch Bar Key Open Messaging menu or execute Left Softkey command/ Display Switch Bar ( P.1-22). function. Center Key Media Player/Character Key Open Main Menu or execute Center Softkey command/ Activate Media Player or select text entry mode.
Page 47
Charger/External Device Port Connect Charger, Stereo Earphone Microphone, USB Cable, • Internal Antenna etc. here. 708SC has no external antenna. 708SC transmits and Microphone receives signals via Internal Antenna. Do not cover or place stickers, etc. over the area containing Internal Antenna. External Camera Voice quality may vary by where/how 708SC is used.
(Flashing in Orange & Yellow) USB Active Display Indicators Packet Data transmission Voice Call in Progress a bcd Video Call in Progress Keypad Lock Set New S! Mail New SMS Unheard Voice Mail Unheard Answer Machine Message Signal Strength (more bars indicate stronger Memory Card inserted signal)
Sound settings: Other than Off for Voice Call in Ringtone volume Set; and On for Voice Call in • When (Red) appears, only packet data Vibration Set transmission and S! Mail sending are available; Sound settings: Other than Off for Voice Call in Voice Call, received S! Mail notification, and SMS Ringtone volume Set;...
Charging Battery Note • Use specified Charger only. • Long periods of disuse may affect battery's ability to hold a full charge. • Battery must be inside 708SC to charge it. • 708SC uses a lithium-ion battery; charge battery in any •...
• Settings When Battery Runs Out Using Slide Show When battery is weak, a warning appears and 708SC Setting Brightness higher or Backlight Time longer Using Media Player with Backlight set to Always on beeps. Charge or replace battery; otherwise 708SC will automatically turn off.
Page 52
BFully remove Battery Cover as shown DInsert Battery Cover Tabs into 708SC Slots as shown Battery Cover Tabs CAlign Battery Slots and 708SC Tabs to insert battery as shown Note • Remove battery cover with care; stress on tabs may 708SC Tabs damage them.
APress Battery Cover and slide as CLift battery up and remove as shown shown AC Charger Use specified Charger only. BFully remove Battery Cover as shown AOpen Port Cover and insert Charger Connector into the port Port Cover Charger Connector (with 1-14...
Page 54
BPlug Charger into an AC 100V outlet • Battery Charged Confirmation AC 100V When 708SC is on while Charger is connected, battery Charger indicator flashes when battery is fully charged. While charging, battery indicators change as follows: flashes when battery is fully charged.
Note • Do not charge battery in ambient temperatures over • To confirm handset phone number In Standby, press c 0; save or edit your 40°C (e.g. inside a closed automobile in direct information in My Phonebook Details including name and sunlight, etc.).
bUse r to toggle AM and PM Time & Date To set date Highlight Date field and enter the year, month, and Time & Date Default Setting Time format: 24H To change time format Date format: YYYY/MM/DD aSelect Time format field bSelect the setting and press c Some 708SC functions cannot be used unless time and date are set.
BSelect Time zone updating and Changing Home Time Zone perform operations to set Default Setting Home zone: GMT+9h CPress w (Save) Daylight saving: Unchecked Select the zone closest to your locality. Set Daylight saving time as required. Complete this setting before selecting •...
CRepeat Step 2 to open/activate the 708SC Menus target function Main Menu <Example> Select Display settings Wallpaper AIn Standby, press c Select Settings Select Display settings Main Menu BHighlight an item and press c (Select) Wallpaper Setup Window Select Wallpaper Pictures appears 1-20...
Shortcuts • To end an operation In Standby, press a key to open the assigned shortcut. Press y. Operation ends and 708SC returns to Standby. When multiple functions are active, the next active operation Corresponding Menu/Function window appears. Messaging • To cancel/escape an operation Press y.
BUse s to highlight a function and Corresponding Menu/Function press c (Select) Mobile Camera (last used function) (1+ seconds) To exit an active function * Create shortcuts for frequently used functions in Idle shortcut From the window of the function to exit, press y ( P.15-7).
Menu Center Access Code 4-digit number specified at initial subscription; required to When Menu appears at bottom-right of Display, press o to open Menu. To execute a menu, highlight the access Voice Mail via landlines/to subscribe to fee-based item and press c (Select). information.
Page 63
Note • Write down Phone Password, Center Access Code, or Network Password. If you forget any of these codes contact Customer Service ( P.24-24). • Do not reveal Phone Password, Center Access Code, or Network Password to others. SoftBank is not liable for damages caused by misuse of these codes by others.
• When Stereo Earphone Microphone is connected Initiating a Call Enter a number and press Stereo Earphone Microphone switch for 1+ seconds to initiate a call. When Earphone See P.5-9 to call from a Phonebook entry or P.6-2 for Video call is On, press switch for 1+ seconds to call specified Calls.
Menu Receiving a Call Item Description AWhen 708SC rings/vibrates, press Video call Initiate a Video Call ( P.6-2). t or c (Accept) Save a number to Phonebook or Add to Phonebook USIM Card Phonebook ( P.5-6). BPress y to end the call Open a new message addressed to Create msg the number ( P.17-6).
Ringtones When you cannot answer a call Specify ringtones for saved numbers by Phonebook entry or Use Call Forwarding/Voice Mail to forward incoming calls to a Category ( P.5-4, 5-7). When no ringtone is set, 708SC rings specified number automatically/to save messages at Voice according to Profile Settings ( P.9-2).
Activating & Canceling • When Side Key ( P.15-5) is set to Reject Press n or b for 1+ seconds to reject an incoming call. Default Setting • To reject call and send a busy message APress c and select Settings Call When neither Call Forwarding ( P.16-2) nor Voice Mail ( P.16-2) is active, press o (Busy) to proactively...
Ringing Duration Checking Recordings When Answer Machine records caller messages, Default Setting Other (18 Secs) appears in Display. APress c and select Settings Call APress c and select Settings Call settings Answer machine settings Answer machine Ringing duration Recordings BSelect an item or Other to set a time BHighlight the message to check and CPress c (Save) press c (Play)
Engaged Call Operations Hold When a call is put on hold, the party on hold hears a hold Earpiece Volume tone and neither party can hear the other's voice. Adjust Earpiece or Earphone volume. Setting remains even A subscription to Call Waiting ( P.16-8) or Conference after power off.
Voice Recording • When a recording is made Record voice of a maximum of 2 minutes during a call. Files are saved to Sounds & Ringtones folder in Data Folder. ADuring a call, press v for 1+ • When another party calls during recording If Call Waiting is subscribed, recording stops and incoming seconds call window appears.
Item Description Engaged Call Menu ® Appears when Bluetooth -compatible Switch to headset/ headset is in use. Select headset or phone Item Description Switch to phone (handset). Whisper on/off With On, raise the volume of sent sounds. Check Voice or Key tone and press Call Log Records w (OK) to cancel sending no sounds Mute...
CHighlight a record and press t : Call to/from a number saved in USIM Card Phonebook : Voice Call to/from an unsaved number To initiate a Video Call : Video Call to/from a number saved in Phonebook Menu Video call Current Contacts (all incoming/outgoing calls) Indicators : Received call...
Deleting All Records Item Description Delete the current Call Log record Delete all Call Log records at once. Delete ( P.2-10). APress r Add to black list Add the number to Black List ( P.13-9). View phonebook Use s to select Current contacts Open Entry details for a number.
To reset Call Times Data Counter, Call Costs, & Call aIn Call times, highlight an item, select Menu Times Reset APress c and select Call log To reset all Call Times aIn Call times, highlight an item, select Menu BSelect an item Reset all To reset a Data Counter item bEnter Phone Password and press c (Confirm)
BSelect the setting and press c (Save) Edit Cost Limit After reaching the call cost limit, only emergency calls International Roaming ( P.2-16) can be initiated; messaging, web connections A separate subscription is required for international calls. (fee-based operations) are disabled. Contact Customer Service for more information about APress c and select Call log Call...
Preferred Networks Network Setup Insert networks into Preferred Networks list or add them to Selecting a Network the end. Select networks from Network List or create new network entries. Default Setting Automatic APress c and select Settings Select a network (operator) by location or use Automatic. Connectivity Preferred networks APress c and select Settings...
BSelect Menu To delete a network from Preferred Networks International dial Highlight network to delete, select Menu Delete CSelect country or Enter Code for direct entry DSelect Abroad • New Network Settings EConfirm number and press t Country code Up to 3 digits Network code Up to 3 digits Network name Up to 20 single-byte alphanumerics...
Emergency Calls Some emergency numbers (110 (Police), 119 (Fire), etc.) are available even when certain Call Barring settings are active. See details below. 708SC Status Available Numbers Offline mode ( P.3-4) is active. None Call Cost limit exceeded ( P.2-13). 110, 119, 118 708SC is locked ( P.13-5).
Minding Mobile Manners Manner Related Functions 708SC offers two manner-related profiles. Please take care not to disturb others when using 708SC. • Turn 708SC off in theaters, museums, and other places Manner Profile where silence is the norm. Silence 708SC sounds and activate Vibration for all alerts, •...
Manner Profile • To change 708SC Profile ( P.9-2) AIn Standby, press # for 1+ seconds Profiles Select a Profile by usage and edit settings as required P.9-2). • When Manner Profile is active Profile Description appears. Normal Normal sounds produced by 708SC •...
Offline Mode Default Setting APress c and select Settings Call settings Offline mode BSelect the setting and press c (Save) • When 708SC is turned off while Offline mode is active Offline mode activation confirmation appears the next time 708SC is turned on. Press o (No) to select Normal Profile.
Number Only Text Entry Fields Text Entry Text entry windows do not appear for Phonebook Phone fields or Alarm Time fields; enter numbers directly. Enter kanji/hiragana/hangul, single- or double-byte katakana, alphanumerics, or symbols/pictograms/emoticons. Changing Text Entry Mode Text Entry modes may be limited in some text entry fields Text Entry Window or windows.
Key Assignments Multiple characters are assigned to each key. Press a key repeatedly until the target character appears. Kanji/Hiragana Katakana Alphanumerics Numbers • Toggle upper/lower-case; add to unfixed, convertible • Toggle upper/lower-case kana Enter Line Break • Enter Line Break •...
When calls/alarms interrupt text entry To add Enter a valid character and press * Answer incoming calls without saving text first; disconnect call to return to text entry window. Similarly, close Alarm To correct a misentry window to return to text entry window. Use C to delete the character then enter the Entering Characters correction...
Page 88
BConvert hiragana To select a conversion from Suggestions • When characters do not convert to target Kanji aPress d to move between Suggestions Try entering different readings. When multiple Kanji characters do not convert together, try to convert them bHighlight a conversion and press c (Confirm) separately.
Resetting Text Entry History To correct a misentry Use C to delete character then correct Previous kanji conversions appear first for predicted/ conversion alternatives. Follow these steps to restore defaults. When key is pressed too many times a Press c and select Settings Phone settings Press # to return to the previous character User dictionary...
Alphanumerics • To enter Katakana in Kanji/Kana entry mode AIn Alphanumerics entry mode, press a For example, to convert " " to " " or " ". key to enter the assigned character a In Kanji/Kana entry mode, enter hiragana b Press o (EngNum ) c Highlight katakana conversion alternative and press To toggle upper and lower case...
Numbers • To enter alphanumerics in Kanji/Kana entry mode AIn Number entry mode, press number Press key(s) assigned to alphanumerics as many times as it would take to enter same character(s) in Alphanumerics keys mode. For example, press 2 three times and press 3 once to enter "cd."...
BHighlight target character and press Symbols, Pictograms & Emoticons To enter symbols, pictograms, or emoticons AIn a text entry window, press # to successively toggle symbols Press w (Continue) To toggle double-byte symbols and single- byte symbols Press while Suggestions for double-byte symbols and single-byte symbols appear •...
SMS Template Line Breaks In a text entry window, use SMS template via Menu to Enter a line break the same way in all text entry modes. quote saved text in SMS. AIn a text entry window, press * Save frequently used words/phrases as SMS templates beforehand ( P.4-15).
Editing Text Hangul Select Hangul entry mode to enter Hangul characters. Deleting AIn a text entry window, press e AHighlight character to delete and and select Hangul press C BPress number keys to enter assigned When a space is highlighted character units that appear;...
Copy/Cut, Paste & Undo • To copy text from Phonebook entries or My Copy/Cut Phonebook Details Copy item ( P.5-13, 5-16) Menu Select a range of characters to copy/cut. Paste copied/cut • Copied/cut items characters repeatedly to other locations. Up to 10 copied/cut items can be saved. Content remains even power is turned off.
Prediction (Japanese) • To delete copied/cut items In Step 3, highlight item to delete, press w (Delete) and Select to show/hide Japanese kana conversion alternatives select Yes. in Suggestions. Default Setting Undo AIn a text entry window, select Menu Undo operations immediately after performing such as Prediction On or Prediction Off Cut, Paste, or Delete.
CSelect Reading field and enter key Font Size characters Default Setting Large DPress w (Save) Change font size for SMS, S! Mail, or template text; available sizes vary. AIn message text, select Menu • To edit User Dictionary entries Font a Press c and select Settings Phone settings Size...
Saving to User Dictionary • When the range contains a line break AIn a text entry window, select Menu Character string before line break is saved to dictionary. • To edit User dictionary Word registration Press (UserDic) to select start point for Word BUse a to move cursor to the first registration;...
Page 99
• To use an SMS template ( P.4-10) • To edit an SMS template a Press w and select Templates SMS templates b Highlight an item to edit and press c (Edit) c Press c (Select) and edit the text d Press w (Save) •...
Availability (Quantity) Saving to Phonebook Item Description USIM 708SC Card Phonebook Entry Items Phone (5 of up to Save phone numbers, mail addresses, and more for up to Saved with area code Number 40 digits 1,000 entries in Phonebook; USIM Card Phonebook each) capacity varies by card.
Page 102
1 Use speed dialing ( P.5-12) to initiate voice calls to primary Availability (Quantity) number saved in Phonebook Entry Numbers 000 - 099. Item Description USIM 708SC 2 The number of items that can be saved varies by the type of Card USIM Card.
To modify Reading Name Adding Entry Items aSelect Reading Name field 708SC assigns lowest available Entry Number; edit as bEnter a reading name (use katakana to organize required. entries in Phonebook list) To save Phone number Highlight Phone number field and enter a number To set Phone icon aSelect Phone number field Phonebook Details...
Page 104
To set Call notice for a Voice or Video Call* To save Hobby* aSelect Call notice field aSelect Hobby field bSelect On bEnter text cOpen Data Folder to select a file To save URL* aSelect URL field To set S! Mail/SMS Notice* aSelect Message notice field bEnter a URL bSelect On...
DSelect a phone icon Secret Mode settings has been changed and tried synchronization. EEnter additional items as required For more information about Samsung PC Studio, see the User's guide in the attached CD-ROM.
FPress w (Save) Edit Category Customize Category names; add image/ringtones to Category Settings appear/sound for incoming calls/messages from members. Organize Phonebook entries among twenty Categories. APress c and select Phonebook New Category (USIM Card) To select a USIM Card Category After Step 1, select Menu View from USIM APress c and select Phonebook...
DEdit Category items To change Category name • Incoming Image & Ringtone Priority Images and ringtones set for individual Phonebook entries Select Category name field and enter a name take priority over those set for a Category. To set Category image •...
ECheck the member to add and press To change method in active search window Press c and proceed to Step 2 w (Add) BPress w (Search) To search Phonebook list • To delete a member from a Category aSelect Phonebook list Deleting a member from a Category does not affect bUse s to navigate Phonebook list member's Phonebook entry.
Page 109
To search by Phone Number Initiating a Call aSelect Phone No. search ASelect an entry, press c (Details) to bEnter any part of a phone number view Details window To search by Mail Address aSelect Email search bEnter any part of an mail address CSelect an entry To open Entry details Entry Details...
Page 110
Calling USIM Card Phonebook Entries • To place a call from Phonebook list Use Entry Numbers as shortcuts to call numbers saved in Highlight an entry, select Menu Voice call or Video the first 100 USIM Card Phonebook entries. call. When entry contains multiple numbers, Default Number is dialled if set;...
Change Search Method Speed Dialing Default Setting Phonebook list Enter the last two Entry Number digits to call Voice Call Specify search window to appear first when d is Default Number in Phonebook entries 000 - 099. pressed in Standby. AEnter last two Entry Number digits APress c and select Settings BPress c (...
Item Description Phonebook Menu View from USIM/ Toggle Phonebook and USIM Use the following menu in Phonebook List or Entry details. View from phone Phonebook. Add international code and country Item Description International dial code to the number ( P.2-2). Add to Start the process of saving a new entry.
When an entry contains multiple phone numbers/mail Editing Phonebook Entries addresses, set calling/messaging priorities by assigning to Default Number. To search, list or Entry details, see "Phonebook Search" ( P.5-9). Resetting an item changes it to Not assigned. Activate Secret Mode to edit Secret Phonebook entries. AOpen Entry details Edit BSelect Menu...
Deleting Multiple Entries at Once Copy to USIM & Copy to Phone AHighlight entries AHighlight entry or open Entry details Toggle Phonebook or USIM Card Phonebook BCopy the entry View from phone or View from USIM Menu From Phonebook to USIM Card Phonebook BSelect Menu Delete Multiple...
Deleting All Entries at Once To enter or edit other items aPress w (Edit) Delete all Phonebook or USIM Card Phonebook entries. bEnter/edit items then press w (Save) AHighlight entries Menu Toggle Phonebook and USIM Card Phonebook Item Description View from USIM or View from Phone Menu Send as a vFile;...
CPress y to end the call Before Using Video Call Exchange voice/video with compatible 3G handsets. • Engaged Video Call Operations ( P.6-3) You may choose not to send your own image ( P.6-6). Video Call Precautions When Video Call cannot be connected •...
Engaged Video Call Operations • To adjust ringtone volume While 708SC is ringing, press n or b. Perform operations from Video Call Menu or Menu. • When a Stereo Earphone Microphone is connected Press Stereo Earphone Microphone switch for 1+ seconds to answer Video Calls.
Page 119
(Blue)/ (Gray): Toggle Your Image and Substitute To cancel Your Image/mic/key tones aMenu Image Mute bCheck item(s) to cancel and press w (Save) : Freeze or unfreeze incoming image When Camera (Your Image) is canceled, Substitute : Toggle Internal Camera and External Camera Image is sent.
Item Description Send DTMF Send push tones. • To adjust earpiece volume Press j during a Video Call. Create and save text memos Memo ( P.14-10). • To enlarge or reduce outgoing image Details Open Phonebook Entry details. Press n or b during a Video Call. ®...
APress c and select Settings Call settings Video call Show my • To restore Substitute Image to its default a Perform Steps 1 and 2 picture b Select any image file in Data Folder Menu Reset BSelect the setting and press c (Save) Retry Settings Selecting a Substitute Image Default Setting...
• Retry with Items • To send sound a During a Video Call, select Menu Always ask: Select an action from Menu. Mute Voice call: Redial number as a Voice Call. b Uncheck Voice c Press w (Save) Messages: Create a message. None: Return to Standby after a failed Video Call.
Before Using Mobile Camera Capture still images in JPEG or video in 3GP format. External Camera Internal Camera Mobile Camera Precautions • Use a dry soft cloth to remove debris from camera lens. • Avoid camera shake; hold 708SC steady or place it on a stable surface and use Timer.
Quality Image Orientation (Horizontal) : Normal Image : Superfine : Fine : Mirror Image : Normal : Low Audio Recording : Economy White Balance : On : Off Recording Time : Auto : Fine : Cloudy : Incandescent : Fluorescent : Limit for S! Mail : 10 seconds Spot Metering...
Mode Description Image size Capturing Still Images 1600 x 1200 Capture single images, select Single Shot 1280 x 960 size for purpose; attach images Single shot 640 x 480 to S! Mail, save as Wallpaper, APress v for 1+ seconds 320 x 240 etc.
Page 128
Adjust brightness Preview Menu Use r or l to lighten or darken image Available Menu may vary by mode and other settings. Item Description EPress c (Take) Toggle Internal Camera and External Switch camera To capture another Camera ( P.7-5). Press w (Back) Select Shooting mode and save setting for Single shot or Panorama Shot, or...
Page 129
Review Menu Mobile Postcard Item Description Use Single shot, Multi-shot, Mosaic shot, or Delete Delete the last image captured. Panorama Shot images. This function renders one of two Set image for Wallpaper, Phonebook Set as images as line art, merging it with the other to create a entries, or Substitute Image.
Page 130
EPress c (Merge) and check result To rotate line art aMenu Rotate To change image bUse s to rotate image and press w (Done) aPress C To change line art color bHighlight image to change, select Menu aMenu Change colour Change image bUse s to select color and press w (Done) cRepeat Steps 4 and 5...
Page 131
FView captured still image(s) Multi Shot APress v for 1+ seconds To view still images individually aHighlight the image and press c (View) In Video mode bPress C Press w (Photos) to change Camera mode To retake a still image BSelect Menu Shooting mode Press w (Back)
Page 132
DPreview image on Display CSelect Menu and perform other actions as required ( P.7-5) Zoom in/out Use u or d to zoom in or out DPreview image on Display Adjust brightness Zoom in/out Use r or l to brighten or darken image Use u or d to zoom out or in EPress c (Take) for each image Adjust brightness...
Shortcut Key Operations Item Description Press the assigned key to change item settings. Toggle Full screen, Full screen Available shortcuts vary by mode or setting status. # Screen mode without indicator, Full screen with grid Item Description w Mode switch 1600 x 1200, 1280 x 960, 1 Size 640 x 480, 320 x 240,...
FPress c ( ) to view clip Recording Video To continue recording APress v for 1+ seconds Press w (Back) In Camera mode Press w (Videos) to open Video mode • To activate/adjust Timer BSelect Menu and perform other In image preview, press 5 to toggle 3 seconds, 5 seconds, 10 seconds, Off.
Page 135
Shortcut Key Operations Item Description Press the assigned key to change item settings. Camcorder Open a function shortcuts graphic shortcuts ( P.7-12). Item Description 320 x 240, 176 x 144, Review Menu Size 128 x 96 Item Description Quality Fine, Normal, Low, Economy Edit Video files in Data Folder Limit for S! Mail, 10 seconds, Edit...
APress v for 1+ seconds Item Description Brightness In Video mode Press w (Photos) to change to Camera mode Mobile Camera Settings BSelect Menu Camera settings Adjust image size, quality, save location, etc. CSelect an item and set Camera Settings To set image size aSelect Size Default Setting...
To set sequential shot speed To set save location (Phone/Memory Card) aSelect Multi-shot speed aSelect Default storage bSelect the setting and press c (Save) bSelect the setting and press c (Save) To set the Single shot mode To set file name aSelect Single shot mode aSelect Default name bSelect the setting and press c (Save)
BSelect Menu To set file name Video settings aSelect Default name CSelect an item and adjust settings bEnter file name To set duration aSelect Recording time bSelect the setting and press c (Save) • Video recording time For Normal recording, record up to one hour of video. To set size •...
Editing Still Images Viewing Still Images APress v for 1+ seconds Edit image files saved in Data Folder. APress c, select Data folder and In Video mode Press w (Photos) to change Camera mode select an image to edit BSelect Menu Go to photos BHighlight a file and press c (View) CHighlight a file and press c (View)
Page 140
To add blur or correct red-eye To add text to image (320 x 240 or above) aSelect Partial effects aSelect Insert text Partial blur or Redeye bEnter text repair Size and use j to adjust text size bMenu and select the suitable operation cMenu Rotate and use s to turn text cPress w (Done)
To flip image Editing Video aSelect Flip bSelect Vertically or Horizontally Edit Video files in Data Folder. cPress w (Done) APress c, and select Data Folder To crop image Videos aSelect Crop Size and use j to adjust trimming BHighlight a file, select Menu bMenu Edit size...
cPress o (Memory) for Memory Card files • To delete the file order for merging dRepeat b and c to check all target files a After e in Step 3 in "To merge multiple videos," use s to highlight the file to delete ePress w (Done) b Menu Delete...
Page 143
CPerform creation operations To add original balloon to image aSelect (Balloon) To add frame to image bSelect Normal aSelect (Frame) cSelect Balloon bSelect the frame dEnter text To add icon to image eMenu Font size and adjust size as required, aSelect (Icon) and press w (Done)
Page 144
dUse a to adjust position and w (Done) eTo add more balloon, select (Balloon), press • To delete added frame/watch c (Insert) and repeat b to d a After Step 2, select (Frame) or (Watch) b Press w (Delete) To add watch on image •...
Attaching Images Attach captured image or recorded video and send via S! Mail. However, in case of videos, only videos recorded with Limit for S! Mail ( P.7-14) can be attached. AAfter capturing, press c (Send) Via message To send video In image review, select Menu Send message...
To set/edit the image of Photo slide Standby Display Settings aSelect Photo slide and press w (Edit) bPerform Steps 2 to 4 in "Setting Photo Slide" Wallpaper ( P.8-2) or perform Steps 2 and 3 in "Editing Photo Slide" ( P.8-3) Default Setting Pictures CPress c (Save)
Page 148
To set effect Editing Photo Slide aUse j to highlight Effect field APress c and select Tools Photo bUse s to toggle setting slide To change slide interval aUse j to highlight Duration field BEdit Slide images bUse s to highlight Effect field To edit still images DPress c (Set) and select Yes (crop aMenu...
CPress c (Set) and select Yes or No BSelect settings Digital clock aSelect Digital clock • To adjust slide size bPress w (Edit) and use s to select clock Select Yes in Step 3 to enlarge the image. type cPress c Clock Display Dual clock aSelect Dual clock...
Setting Font Type to Display • Display Format when Calendar is set In Standby, a calendar appears in the format set by Starting day ( P.14-6) in Calendar. Default Setting Font1 • When Dual clock is set Font type to display can be changed. Two clocks appear in Standby.
Menu Display Popup Menu Default Setting Menu Style When active, sub menus appear in a popup window when Default Setting Black a menu item is highlighted. Change Display type of menu list (Except Yahoo! Keitai APress c and select Settings menu).
Backlight Brightness & List Font Size Duration Default Setting Large Adjusting Display Brightness Set main menu item font size. APress c and select Settings APress c and select Settings Display settings Font List font Display settings Brightness size BUse a to adjust brightness and BSelect the setting and press c (Save) press c (Save) Backlight Duration...
BSelect an item and set it Dialing Display To set illumination time aSelect On field Default Setting Font type: Serif bSelect time and press c Appears when dialing in Standby. When character type is To set panel off time set to Normal or Serif, select font size, color and aSelect Dim field background color.
cFor Monochrome, use u to select Color field, then s to select a color To set background color aSelect Background colour bUse s to select a color CPress c (Save) Display Language Default Setting (Japanese) Set 708SC user interface to appear in English, Japanese, or Korean.
cHighlight a melody, select Menu Play Changing Profile Settings dPress o (Select) ePress w (Save) Change 708SC incoming transmission response by profile. To set S! Mail/SMS ringtone In Car Profile, select Call answer mode. aSelect Ringtone and Messages AIn Standby, press * for 1+ seconds bSelect setting BHighlight a profile and press w cPress w (Play) to confirm ringtone and press...
Page 158
To set Phone sounds aSelect Phone sounds • Ringtone volume bCheck items to set and press w (Save) Select for step-up ringer. • Acoustic shock To set key tone Reduces ringer volume to Level 1 for the first two seconds. aSelect Key tones •...
Page 159
• To change ringtone title for S! Mail/SMS a After b in "To set ringtone for S! Mail/SMS" in Step 2, highlight Special tone and press o (Change) b Select location to save the file c Highlight the file, select Menu Play d Press o (Select) e Press w (Save)
Page 160
Profile settings Available items vary by Profile. Defaults are as listed below. Profile Normal Manner Meeting Outdoor Item Ringtone volume Voice call Level 4 Level 4 Level 5 Video call Level 4 Level 4 Level 5 Messages Level 4 Level 4 Level 5 Ringtone Voice call...
Page 161
Profile Normal Manner Meeting Outdoor Item Ringtone duration Messages 5 Seconds 5 Seconds 5 Seconds 5 Seconds Key tone volume Level 2 Level 4 Level 5 Phone sounds Several tones On Alerts on call Several tones On Alerts on call Several tones On Key tones Xylophone...
Page 162
Phone Sounds Available items vary by Profile. Volume Level set in Key Tone Volume applies to all Phone Sounds. Item Description Check/uncheck all items. Popup box alerts Sounds for confirmations/warnings. Sounds about once a minute during Minute minder calls. Sounds when calls connect before Call connect tone called phone rings.
Playable File Formats Before Using Media Player Player File (Extension) Play Data Folder sound/video files or stream online media. Music MPEG4 Audio (.mp4, 3gp (sound only)) • From Music or Video menu, select Download music or Video MPEG4 (mp4, 3gp) Download videos, to download files via Yahoo! Keitai.
CPress c (Play) Playing Music In Standby, press e BSelect files To select from All music Select All music and highlight the file To select from Recent music Melody Player Window Artist's name and title (File name when title is Select Recent music and highlight the file unknown) To select from Most played music...
Page 167
• Memory Card Music Files When Memory Card is inserted, Memory Card music files • To end playback and return to Menu appear in All music list, indicated by Press C. In Menu, press C to return to the previous menu or close Menu menu.
Page 168
Player Window & List Menu Item Description Available items vary by file type, etc. Details Confirm file size, etc. Item Description Stop End playback. Send file via S! Mail ( P.17-6) or In Player window, select Headphone Send ® Bluetooth ( P.12-6).
• When Transfer to A/V headset is set • To create a Playlist from tracks in an existing one: a Perform Steps 1 to 3 Raise/lower volume from A/V headset. b Menu Playlist c Select Playlist from which to add all melodies Playing Files from Playlists •...
Play Tone Volume APress e to select Playlist to play, APress e, select Menu Player select Menu Play settings Tone volume Changing Music Player BUse a to adjust the volume and Settings press c (Save) Repeat Mode Audio Skin Default Setting Default Setting Rainbow wave Play a single track repeatedly, all files in All music, or...
Skin, Show Controller, & Backlight Visualization Mode Default Setting Skin: Flowers Visualization On/Off Show controller: Show Backlight: Normal Default Setting Select one of ten skins to appear while music plays. Set Activate or cancel this setting to apply or cancel Skin, Show controller to Hide for full screen view.
CPress c (Play) Playing Video APress c and select Media Player Video BSelect files Video Player Window From All Video Artist's name and title (File name when the video title Select All Video and highlight the file information is unknown) From Recent video Playing status : PLAY/PAUSE/STOP Select Recent video and highlight the file...
Page 173
Player Window & List Menu Select Menu in Player window or list and perform operations • To set video file as Ringtone listed below. Available items vary by file type, etc. Highlight paused file or one from list and press w (Set Item Description as).
Item Description Player Settings Add a file to Playlist in All Video. Select Selected file to add highlighted Add to playlist Repeat Mode file to Playlist. Select Multiple file to add multiple files. Default Setting Delete Delete files ( P.11-18). Play a file repeatedly or files in a folder randomly/ Rename Change file name.
Tone Volume Resolution APress c and select Media player Adjust video size during playback or while paused. APress c and select Media Player Video Video BHighlight a file and press c (Play) BHighlight a file and press c (Play) CSelect Menu Player settings Tone CSelect Menu...
Data Folder Folder Description File Formats JPEG, BMP, GIF, WBMP, Pictures All still images 708SC files are organized in folders by file format. PNG, Animation GIF Videos All videos MPEG4 (3GP, MP4) Default Folders All sounds recorded SMAF/MIDI/SP-MIDI, Sounds & with Voice Recorder, MPEG4 Audio, Data Folder contains four default folders;...
Memory status Saved Files Select to view memory usage of each Data Folder. Alternatively, use setup menu to view memory status Opening Files ( P15-8). Download links APress c and select Data Folder appears in Data Folder for download site shortcut. Select to connect to the download site.
Page 179
• After enlarging/reducing image Note After b in "To enlarge or reduce image," press o ( • Files over 3 MB cannot be opened. Files larger than to open list window. 1600 x 1200 pixels cannot be edited or zoomed. Press o ( ) to change window view;...
CSelect Menu/navigation shortcuts to Using File Viewer navigate Open PDF, XLS, DOC, PPT, or TXT files saved in Data Folder; To scroll File Viewer activates automatically. Select Normal View or Press a Full Screen View; navigate files via Menu or shortcuts. To change Display appearance Navigation Full screen view or Normal view...
Page 181
To rotate image 90 degrees clockwise File Viewer Settings aMenu Rotate Default Setting Panning: 10 pixel Reflow: Off bMenu Rotate to return to the previous Map on: On Controller: On window Name: Capture To search words in the page APress c and select Data Folder aMenu Search BSelect save location and select the file...
Page 182
To set Map (shows display position) on/off Navigation Shortcuts aSelect Map on Description bSelect the setting and press c (Save) Side Key n Zoom in Side Key b Zoom out To set guide for shortcuts in Full screen view Move to the first page aMenu Settings Controller...
CSelect Menu/navigation shortcuts to Viewing Graphics/Animation with navigate the SVG-T/Flash ® Viewer To change Display appearance View SVG, SVGZ, and SWF formatted files in Data Folder. Full screen view or Normal view Menu When one of these files is selected from Data Folder list, To enlarge or reduce the image ®...
To sort files in ascending order of size Select Size • To set an image for Wallpaper Press w (Set as) on Normal View, or in Menu of Full To sort files by status of Content Key Screen View, select Set as and select Wallpaper. Select Activation Status Confirmation Window &...
To set as Phonebook entry image Using Files aSelect Caller ID bSearch Phonebook, select an entry and press Wallpaper c (Set) Use image files for Wallpaper, Phonebook entries, or Video To set as Video call Substitute Image Call Substitute Image. aSelect Still picture bPress c (Save) AHighlight a file and press w (Set...
Setting Sound File as Ringtone • When setting Memory Card file Change ringtone settings in Normal profile ( P.3-3). Copy or move file to 708SC before setting. APress c, select Data Folder and • Player Restrictions MP3 files or WAV files, can be set only when they are select location to save the file copyrighted.
BHighlight the file, press w (Set as) CSet ringtone To set video file as ringtone for Voice Call CSelect Wallpaper Select Voice ringtone DCheck preview window and press To set video file as ringtone for Video Call c (Set) Select Video ringtone To set ringtone for Phonebook entries Saving a vFile Select Caller ringtone...
Item Description Data Folder Menu Register to Export a vCalendar file to Calendar Calendar ( P.11-12). Menu vary by file or folder. ® Send file via S! Mail ( P.17-6) or For File Viewer or SVG-T/Flash Viewer, see "Using File Send ®...
Item Description Item Description Activate Camera in Camera mode In Memory Card Data Folder window with Take photo ( P.11-4). Memory card Memory Card inserted; check details settings information, format, and change names Record video Activate Camera in Video mode ( P.11-4). ( P.11-23, 11-23, 11-23).
Moving a File/Folder Changing a File Name/Folder Name Move a file/folder to another folder or a location outside folders. Alternatively, with Memory Card inserted, move Change the name of a file or a created sub-folder. folders between 708SC (Phone) and Memory Card. APress c and select Data Folder APress c and select Data Folder BSelect Default folder and highlight a...
Page 191
To select and move multiple files or created sub-folders • To check/uncheck all files or folders at once aSelect Multiple Press o (Mark all) or o (Unmark all) bCheck files or created sub-folders to move and • When a file is locked press w (Move) File cannot to be moved.
CCopy file or folder Note To copy one file or all files in the same folder • Downloaded files may not appear/play properly if moved to another device or when a different USIM or all folders Card is inserted in 708SC. Select Selected or All •...
CDelete the file To delete one file • To check/uncheck all files or folders at once ( P.11-16) Select Selected • When a copy of a file or folder is pasted to the same To delete all files from the same folder location as the original aSelect All The pasted file or folder is saved under another name, i.e.,...
CEnter Phone Password, press c (Confirm) and select Yes • To check/uncheck files at once ( P.11-16) With no file saved in sub-folder, Phone Password is • If a file is set as Wallpaper or ringtone, or locked Confirmation appears; select Yes to delete file. When not required.
CPerform operations to delete Note To delete a Content Key • Protect important information SoftBank is not liable for any damages resulting Select Selected from accidental loss/alteration of information. Keep To delete all Content Keys a copy of Phonebook entries, etc. in a separate Select Delete all place.
Precautions Inserting & Removing Note the following precautions regarding microSD Turn handset power off before inserting or removing a Memory Card usage and care. Memory Card. • To reduce risk of malfunction, use only recommended Inserting microSD Memory Card sizes. AOpen cover •...
Page 197
BWith contacts side up, insert Memory BLet card pop out, remove card Card until it clicks CClose cover CClose cover Removing • Removing during operations AOpen cover, gently push down on card If Memory Card Data Folder is open when Memory Card is removed, Data Folder automatically appears in its place.
Note Memory Card Details • Avoid using excessive force when inserting/ Check Memory Card name, memory capacity, or remaining removing Memory Card. memory. • Take care not to lose removed Memory Card. APress c and select Settings • Avoid touching/damaging Memory Card contacts before inserting/removing a Memory Card.
External Connections Item Specification Communication ® Bluetooth Standard Version 1.2 ® Exchange files wirelessly with Bluetooth -compatible Standard devices, or connect to PCs or printers via USB cable. Headset Handsfree ® Serial Port Bluetooth Dialup Networking ® Applicable File Transfer Exchange files wirelessly with Bluetooth devices or use a profiles...
Page 202
® Bluetooth Precautions ® ® • To check Bluetooth functions available • 708SC may not work with all Bluetooth devices. a Press c and select Settings Connectivity ® • File transfers may not possible with some Bluetooth Bluetooth Bluetooth service devices.
Search New Device Sending & Receiving Files Save up to 10 devices to My devices list. Enter the same Send and receive Phonebook entries, My Phonebook Passkey on both 708SC and the device. details, Schedule information, Task information, still ® Activate Bluetooth on device beforehand.
Page 204
• To delete a device from My devices a Press c and select Settings Connectivity • Passkey Bluetooth My devices ® The Passkey is a password used to connect Bluetooth b Highlight a device, select Menu Delete Selected compatible devices. When connecting to a handsfree device, or All enter the Passkey specified for it.
My devices list indicators To send files from other functions (except Device name is preceded by one of these indicators: Data Folder) : Personal Computer : Mobile phone aIn list window, highlight the data to send : Handsfree device/Headset bMenu Send Via bluetooth : PDA...
Page 206
CSelect receiver’s device Receiving a File To save device When connection from the sender is approved, file Select Search new device and register device reception starts and the received file is saved in Data ( P.12-4) Folder. AWhen confirmation window appears, select Yes •...
Page 207
BCheck files to print and press To set whether or not to print a frame w (Print) Select Border and select the setting To set a print quality CSelect receiver's device Select Print quality and select the setting To register receiver's device EPress c (Preview) Select Search new device to search and register FCheck the preview window and press...
Waiting for a Connection Request • To receive an accessed file In the steps given below, 708SC is placed in mode waiting After Step 3, select a file to receive. for a handsfree-device connection request. APress c and select Settings Locations of received files Received files are automatically saved to Data Folder.
APress c and select Settings BSelect the setting Connectivity Bluetooth Answering mode • While Private Mode is set BSelect the setting Answer outgoing/incoming calls with 708SC for calls made with 708SC; answer outgoing/incoming calls with handsfree devices for calls made with handsfree devices. •...
APress c and select Settings Secure Mode for Data Transfer Connectivity Bluetooth Default Setting phone's visibility If set On, a confirmation appears before transfer. BSelect the setting APress c and select Settings ® Bluetooth Name Connectivity Bluetooth Secure mode Default Setting 708SC BSelect the setting Change 708SC name appearing on other devices.
• Perform packet data communications cable Before Using the USB Connection DSelect printer settings Install USB driver and Samsung PC Studio beforehand. For To set paper size more about installation, PC operating environment, etc., Select Paper size and select the setting see attached CD-ROM User Guide.
To set whether or not to print the date Mass Storage Select Date print and select the setting With Memory Card inserted, connect 708SC to a PC via To set whether or not to print a frame USB cable; exchange files with PC via Memory Card. Select Border and select the setting To set a print quality Connecting to a PC...
Disconnecting from a PC AWhile connected, press o (Exit) BFrom the PC, perform operations to disconnect hardware devices CUnplug the USB cable Note • Never remove USB cable while disconnecting. 12-14...
Change Phone Password Changing PIN/PIN2 APress c and select Settings Default Setting 9999 Change PIN code or Security APress c and select Settings Change PIN2 code Security Change phone password BEnter current PIN or PIN2 and press BEnter current Phone Password and c (Confirm) press c (Confirm) CEnter new PIN or PIN2 (4 to 8 digits)
PIN Lock Resetting PIN Lock If PIN or PIN2 is been incorrectly entered three consecutive Default Setting Enable times, PIN or PIN2 lock is set, restricting operations of To require PIN authentication each time the power is 708SC. Unlock PIN or PIN2 lock. turned on, set this function to Enable.
APress c and select Settings Note Security USIM lock • For more information about PUK and PUK2, contact Customer Service ( P.24-24). BSelect the setting and press c (Save) • If incorrect PUK Code is entered ten consecutive CEnter a USIM password (4 to 8 digits) times, USIM Card is locked (turning 708SC off does not reset count).
BSelect the setting and press c (Save) • USIM password CEnter Phone Password and press This is a password dedicated to USIM Card authentication. If c (Confirm) the USIM password matches, another USIM Card may be used in 708SC. Change USIM password each time USIM check setting is set Password Lock to Enable.
Activate Secret Mode • When Password lock is canceled Password lock is automatically set to Disable. Default Setting Hide Activate Secret Mode to hide Secret Phonebook entries. Privacy Lock APress c and select Settings Default Setting Unlock all Security Activate Secret mode Activate to require Phone Password entry to open All, BEnter Phone Password and press Messages, Data Folder, Phonebook, Call log or...
To select an address from Phonebook Mobile Tracker aHighlight To field and select Menu Phonebook Default Setting bSearch Phonebook and select an entry ( P.5-9) Activate to receive notification whenever a different USIM cHighlight phone number and press c (Select) Card is inserted.
Reject Withheld • To delete an address After Step 5, highlight the address, select Menu Delete Default Setting APress c and select Settings Call When a different USIM Card is inserted If Mobile Tracker is on, SMS notification is sent to specified settings All calls Reject incoming...
APress c and select Settings To select a phone number from Phonebook Call aMenu Phonebook settings All calls Reject incoming bSearch Phonebook and select an entry ( P.5-9) calls cSelect phone number BSelect Reject unavailable field To enter a phone number using Call Log aMenu Call log CSelect the setting and press c...
Reject Black List Restoring Defaults APress c and select Settings Call Clear Memory settings All calls Reject incoming Clear Data Folder, Messaging folders, Phonebook (Phone) calls entries, and Calendar entries each or all at once. BSelect Reject black list field APress c and select Settings CSelect the setting and press c Memory settings...
APress c and select Settings Master Reset Memory settings Phone memory Reset Settings Master reset Reset settings Clear Saved contents/settings and restore defaults. BEnter Phone Password, press The following contents are not effected. c (Confirm) and select Yes Setting menu Content not to be reset Phone settings Time &...
ESelect and set other items as required Alarms Set a name (Wake-up alarm cannot be edited) aSelect Alarm name field Wake-up Alarm/Alarms bEnter the name to set Save Wake-up alarm and up to four Alarm times. Add titles Set Alarm time to appear at Alarm time.
Page 228
Set whether to sound repeatedly or once aSelect Repeat field • When wake-up alarm/alarms are set bSelect Everyday or Once alarm and press c appears. • When wake-up alarm and/or multiple alarms have Set days of the week for repeat alarm been set for the same activation time aSelect Repeat field Wake-up alarm takes priority over Alarm1 to Alarm4.
When alarm time arrives Auto Power On Alarm sounds and a message appears. If set to mute ( P.9-3), handset vibrates. Press any key once to stop Alarm Default Setting sound and once more to clear the message. When this setting is active, 708SC automatically turns on When Snooze is on at Wake-up alarm or Alarm time.
At Wake-up alarm/Alarm Time Viewing Calendar 708SC automatically turns on and Alarm sounds. Press any View Calendar in Monthly, Weekly or Daily view. key to cancel Alarm ( P.14-4). 708SC returns to Standby. Calendar Displaying Calendar Monthly View Window Weekly View Window APress c and select Tools : Highlighted position (In Yellow) : Anniversary registered...
Page 231
Calendar Window Format • To see previous or later months in Monthly view Default Setting Starting day: Sunday Press */#, highlight Year/Month field and press Default view mode: Monthly view • To see previous or later weeks in Weekly view Set first day of the week to Sunday or Monday as well as Press */#, highlight Year/Month field and press the default Calendar window.
CSelect items and set Set a title • When setting of Starting day is changed If Clock Display ( P.8-4) is set to Calendar, the format of Select Title field and enter a text the calendar that appear in Standby will also be changed. Set details •...
Page 233
Set an alarm aCheck Alarm field to select • To make it easier to enter a Start/End date bHighlight Before field, enter an interval before Put cursor on the target date on Calendar window before Alarm time, use s to highlight Unit field and Step 2 to show that date in Start date or End date field.
Page 234
cHighlight Alarm time field, and enter a time Anniversary/Holiday dSelect Alert tone field, select the location of sound Register a maximum of 50 anniversaries and 50 holidays. of files and select an alert tone APress c and select Tools Set to repeat every year Calendar Check Repeat every year field DPress w (Save)
Page 235
Memo • To make it easier to enter a date ( P.14-9) Up to 20 memos can be registered. Memos can be registered even while talking ( P.2-9, 6-5). Tasks APress c and select Tools Register a maximum of 100 time-limited items and Calendar manage them in a list.
Page 236
Set a description of the task aSelect Task field • To simplify Start or Due date entry bEnter text Put cursor on the target date on Calendar window before Step 2 to show that date in Starting date and Due date field. To set the starting date •...
Viewing Saved Calendar Entries Editing Calendar Entries APress c and select Tools Editing and Saving as New Entries Calendar In addition to edit and update the entries, edit the entries and save them as new entries. BOpen a window listing items APress c and select Tools To check items of one day Select a date on Monthly view window or Weekly...
EChange the information as required Deleting Calendar Entries FPress w (Save) and select New or AIn Calendar window or saved contents Update list, select Menu Delete Marking a Task as Completed BDelete the entry APress c and select Tools To delete only the highlighted entry Calendar Select Selected To delete all entries of current month or week...
Item Description Delete Delete a Calendar entry ( P.14-13). • To collectively delete multiple registered items Set or cancel the task completion mark Select registered unnecessary items from a list by type and Completed/To do delete them collectively. ( P.14-12). a Press c and select Tools Calendar Sort by...
Voice Recorder Recording Voice Recorded voice is saved to Sounds & Ringtones Data Record up to 60 minutes; activate from Tools, during a call, Folder. via Data Folder Menu or a Message creation window. APress c and select Tools Voice Voice Recorder Window recorder Control Voice Recorder with Softkeys and navigation key.
Item Description Playing Voice Delete Delete a recorded voice file. Replay a voice file saved in Data Folder. Rename Change file name. APress c and select Tools Lock/Unlock Set/release file protection. Voice Details Confirm recorded sound file size, etc. recorder Select the file name assigned Record settings automatically or the fixed recording...
BSelect Menu Set Default Memory Record settings Default name With Memory Card inserted, set save location to 708SC (Phone) or Memory Card for recorded sound files. CEnter a name Default Setting Phone APress c and select Tools Voice • If the default name is changed recorder The naming rule is applied from the next recording.
BUse j to highlight area 1 and use Viewing World Clock s to change city name APress c and select Tools World To set summer time clock aPress o (DST ) bCheck the area to set summer time and press w (Done) CPress c (Save) Current time and city name of area 1...
To enter , or Converting Currencies Press r, l, u, or d APress c and select Tools To display the calculation result Press c Converter Currency To enter ., (, or ) Press w (.( )) to toggle symbols Original currency Enter the amount in original currency To move cursor left or right Target currency...
CSelect Original currency amount field To add a currency unit aPress w (View Rate) and enter the amount bMenu Add Rate To enter a decimal point cEnter the currency unit/rate and press c (Save) Press * DSelect Target currency field and Converting Units currency APress c and select Tools...
CSelect Original unit field and select Stopwatch the unit Use 708SC as a stopwatch; record up to ten lap times and To replace original unit with target unit total time. Press o (Reverse) APress c and select Tools DHighlight Original unit value field and Stopwatch enter value BPress c (Start)
Dictionary Use English-Japanese & Japanese-English dictionaries. APress c and select Tools Dictionary BSelect text entry field and enter word CPress o (E J/J E) • Use Dictionary results for another search After Step 3, select a word from results: Highlight English and press o (E J) for Japanese, or w (E E): for words beginning with the same letters.
Calling Functions • When Retry with is set for Video Call Automatic redialing settings take priority. Auto Redial • When receiver has activated Voice Mail or Call Forwarding Default Setting The call is forwarded and automatic redialing is canceled. Set to automatically disconnect a Voice/Video Call initiated to a party that is busy and redial the same party soon.
Editing Country Codes To add or change aHighlight the item to add or change and press Default Setting 1: Japan 2: KOR 3: GBR 4: ITA 5: CHE c (Change) 6: ESP 7: DEU 8: PRT 9: NLD 10: FRA bSelect Country name field and enter the country 11: MCO 12: USA 13: SWE 14: AUS name...
Page 251
APress c and select Settings To enter a phone number using Call Log Call aPress c (Select) and select Call log settings Voice call Earphone call bSelect the log record BSelect Earphone call activate EPress w (Save) CSelect the setting DHighlight Call number and perform •...
Handling Incoming Calls Acoustic Shock Default Setting Anykey Answer Reduces ringer volume to Level 1 for the first two seconds. Default Setting APress c and select Settings Call Answer Voice Calls using keys other than c (Accept) or settings All calls Acoustic shock BSelect the setting and press c (Save) APress c and select Settings...
Simple Search Keypad Lock Default Setting Default Setting APress c and select Settings When Simple search is On, enter numbers in Standby to search Phonebook entries starting with Reading name Phone settings Auto keypad lock corresponding each number. Then search result (entry BSelect the setting and press c (Save) names and phone numbers) list appears.
Idle Shortcuts • To change functions Up to eight frequently used functions can be saved; create a In Step 2, Highlight the function, select Menu Assign own Shortcut Menu. In Standby, press u to access b Select Yes and select the function functions saved to shortcuts.
Set Default Memory Memory Status Check the following information: Default Setting On phone • Available shared memory With Memory Card inserted, select save location to 708SC • Status of SMS and S! Mail mailboxes (Phone) or Memory Card. This location change is available •...
Page 256
• To delete contents Data Folder, Calendar or Phonebook content a Perform Steps 1 and 2 b Highlight an item, press c (Select), select Yes and view an entry c Check the fields to delete, press w (Delete) and select •...
Page 259
Service Description Optional Services Caller Show or hide your own number when placing Identification calls. The following optional services are available with 708SC: * This service requires a separate subscription. Service Description When you know you will be unable to answer Call Note calls to 708SC, automatically divert calls to a...
Call Forwarding Activating Call Forwarding Specify a forwarding number beforehand. Set forwarding condition and number, by call type (Voice Call or Video Call), beforehand, to divert incoming calls to APress c and select Settings Call a specified number. Voice call or Video call settings Forwarding Description...
CHighlight Forwarding address field Cancel All and enter a number Cancel all Diverts services at once. To select a phone number from Phonebook APress c and select Settings Call aHighlight forwarding Address field and select Voice call or Video call settings Menu Phonebook...
Voice Mail Activating Voice Mail APress c and select Settings Forward an incoming Voice Call to Voice Mail Center or a Call specified number based on preset forwarding conditions settings Voice mail ( P.16-3). BSelect No reply or Always Note CFor No reply, highlight Waiting time •...
Canceling Voice Mail Listening to Messages Cancel all Voice mail services at once. When a caller saves a Voice Mail message, a notification appears in Standby and appears at the top of Display. APress c and select Settings Call settings Voice mail Cancel all Notification...
Incoming Call Notification AEnter 1414 and press t • To access caller message from overseas a Press 0 for 1+ seconds and enter + b Enter 819066514170 and press t To set via landline in Japan (toll free) Dial 090-665-1414 and press t •...
Call Waiting* Receiving a Second Call When there is an incoming call during a call, you are * A separate subscription is required to use this service. notified with a specific interrupt sound and display. Place This service is only available for Voice Calls. the current call on hold and answer the second call.
To end both calls at once New Call Menu All calls When a new call is connected, first party is placed on hold. ADuring a call, select Menu New call • When one party ends a call with another on hold Press w (Retrieve) to talk to the waiting party.
Join Engaged Conference Call Operations ADuring a call, initiate a call to another ACall another party during a call party ( P.16-9) ( P.16-9) BSelect Menu Join BPress w (Swap) to switch connected calls • To talk with only one person During a call, select Menu Split and select a caller to talk •...
Setting restrictions requires Network Password (The 4-digit Call Barring number dedicated to Outgoing/incoming service specified Bar outgoing/incoming Voice/Video Calls or SMS by the at the subscription). conditions listed below. Note Item Description • If incorrect Network Password is entered three Deactivates initiating calls and All outgoing consecutive times, Call Barring service is disabled.
DSet or cancel call barring To set • If a call is attempted while restrictions are on A message appears indicating that outgoing call restriction is Press c (ON) active. The message may appear after a while depending on To cancel service area.
CEnter Network Password and press c Show My Number Changing Network Password Default Setting By network APress c and select Settings APress c and select Settings Call Call settings All calls Show my settings Call barring Change number password BSelect setting and press c (Save) BEnter current Network Password in old field and new Network Password (4 digits) in New and Confirm fields,...
Page 271
AEnter Show ID or Hide ID Prefix To show Caller ID Press 186 To hide Caller ID Press 184 BEnter phone number CPress t To initiate a Video Call Menu Video call 16-14...
Getting Started • Retry function S! Mail If the other party's handset cannot receive a message because the power turned off or out-of-range, 708SC keeps Use this service to send/receive long text messages, the message saved on Mail Server; then send to the other images, videos, other files, and sounds between S! Mail party after signal reception recovers stable.
Page 274
APress w (View) • When a message is received (out of Standby mode) appears on the top of Display ( P.1-9). • Received message count When there are unread messages, the total number of new and unread messages appears. Received Message List •...
BSelect a message with the rest of it 3D Pictogram ( P.20-5) By default, when you check an incoming/unread message (Except S! Mail that is set for Slide Show or with an attachment), the message text appears in 3D Pictogram. After 3D Pictogram display ends or w (Stop) is pressed, Message window appears.
Message window for S! Mail with an inserted file ( P.17-16, 17-18) • Received Message list window indicators If an image is inserted, the image appears with the message. : Unread reception notification (Priority: High) If sound is inserted, select Menu Play to play sound.
BCreate a message and press w S! Mail (Send) Approximately Maximum of 70 10,000 single-byte/ single- byte/double- double-byte byte, Katakana Number of characters characters characters that • Subject display of S! Mail for replies Approximately Maximum of 160 can be sent The subject of a replied S! Mail is prefixed with "RE:"...
Procedures • To set sending settings beforehand ( P.20-2, 20-5) Create messages in the flow shown below. Enter items other than Destination required. Automatic Change of Message Type When message creation is started, the message type is set to Creating S! Mail Creating SMS SMS;...
BEnter an address Address To select an address from Phonebook Enter a phone number or mail address for S! Mail or a aSelect Address field and select From Phonebook phone number for SMS as a message address. Up to bSearch Phonebook and select an entry ( P.5-9) twenty addresses can be entered.
Page 280
CTo enter another address To enter an address directly • To create a message using a template ( P.17-14) aSelect Address field • To confirm the entered address In Step 3, select Menu View recipient list bSelect Entry field and select Enter Recipient •...
• To copy, cut, or paste characters ( P.4-12) Subject • Viewing Address field AIn Message creation window, select When multiple addresses have been saved, and the number of addresses appear in Address field on Message Subject field creation window. BEnter a subject Note •...
Sending a Message • To copy, cut, or paste characters ( P.4-12) AIn Message creation window, press • To use an SMS template or Phonebook entry w (Send) ( P.4-10) • To change the font size of characters being entered In Step 2, select Menu Font Size Small, Standard,...
Slide Show • To insert Image, Sound, or Video Open S! Mail window in Slide Show. Text messages, Perform operations in "Inserting a File" ( P.17-16). images, movies, and sounds can be inserted on each page Alternatively, other files can be inserted in the same page. But image/video or sound/video cannot be displayed in the of Slide Show.
Page 284
BSet settings as required bMenu Edit style cHighlight Font colour and use a to highlight a To set background color color aMenu Edit style Set font size for all pages bHighlight Select page and use s to display All aMenu Edit style pages bHighlight Select page and use s to display All...
CPress c (Save) DCreate a message and press w (Send) • To preview the style before sending a In Message creation window, highlight a field other than • To use after viewing an S! Mail template Address field a Perform Steps 1 and 2 b Menu Preview b Menu...
Attaching a File • To check the size of a message being created AIn Message creation window, Select Select S! Mail as the Type of the message, the message size Attach field appears in the upper-right corner. BAttach file Note •...
Page 287
To attach Calendar items as vCard file format • To delete a file aSelect Calendar item a In Message creation window, highlight a file in Attach field and select Menu View attachment bSelect the items b Highlight a file and select Menu Remove Selected •...
Page 288
BSelect file to insert • To preview an inserted file a Menu Preview b Menu Play Inserted file name • If you insert a file In Message creation window, the icon indicating the file Message Creation Window type, file name, and file size is displayed in Text entry field. If (File Inserted) you inserted an image with no restrictions on its being To insert an image...
BSelect a creation method and insert • To insert a file where another is inserted the file A new Slide Show page is added automatically and the file is inserted. In case of an image file and sound file, both can be To capture a photograph inserted on the same page.
Saving Created Messages • If you insert a file 708SC works the same way as the file inserted from Data Save to Drafts Folder to Text entry field ( P.17-17). • To insert a file where another file has already been When message creation is interrupted before completion, inserted etc., save the message being created to Drafts.
Note • Save to Drafts appears in Menu after address, subject or text has been entered or a file is attached/ inserted. Save as a Template By saving a message with fixed contents, etc. as an S! Mail templates, new S! Mail can be easily created and sent. AIn Message creation window, highlight Attach or Text entry field BSelect Menu...
Viewing Messages Note • When adding a new SMS to Drafts, Unsent msgs, or Five mailboxes are created on 708SC. Sent msgs cause the maximum number of allowed message to be exceeded, the oldest SMS is deleted Mailbox Message type automatically.
Page 294
From a personal folder in Received msgs Message List Window Select a folder; then Phone Password entry window The following information appears in lists for each appears, enter Phone Password and press c (Confirm) Messaging folder. CSelect a message Message type icon Sender or recipient Reception date Subject or the top of the message...
Message Window Operations • Unsent Message Indicators : S! Mail : S! Mail (Video and/or sound inserted) Saving to Phonebook : SMS : Sending S! Mail Save phone number/mail address of the sender/recipient to • Sent Message Indicators Phonebook while viewing Message window (Received)/ : S! Mail Reception notification window.
Page 297
EPress w (Save) Note • While viewing S! Mail sent via PC, etc., Save as Note S! Mail template does not appear in Menu. • When an underlined phone number, mail address or Message Window Menu URL is highlighted in a message window, Add to Phonebook does not appear in Menu.
Item Description Save number or mail address to • Reply subject prefix Add to Phonebook or USIM Card Phonebook "RE:" automatically appears before S! Mail Reply subject. Phonebook ( P.18-5). • When Reply with text is On Details Confirm S! Mail size, etc. Received message text automatically appears two lines Display a message in 3D Pictogram below Reply text in Text entry field.
Forwarding a Message Note • If shared memory ( P.24-14) is less than 464KB, you Forward a received or sent message to another recipient. cannot forward a message. To forward the message, delete messages or files in Data Folder. APress w and select Received msgs or Sent msgs Sending from Drafts BHighlight message, select Menu...
BSelect a mailbox Sending from Unsent Messages To delete a saved S! Mail or SMS templates Select Templates S! Mail templates or SMS Send messages directly from Unsent Messages. templates APress w and select Unsent msgs CDelete a Message or Template BHighlight the message and press To delete one message or template w (Send)
Designating & Deleting a • To view the contents of multiple messages or S! Mail Mailbox templates while selecting them APress w to select Settings a Repeat Steps 1 and 2 b Menu Delete Multiple Delete all c Highlight message or S! Mail template, select Menu View BCheck a mailbox to delete •...
Note Deleting All Messages from a • Personal folders cannot be deleted by this Mailbox operation. To delete Personal folders, select Messaging Settings Delete all Delete saved templates all at once. • You cannot delete the S! Mail template designated APress w as the default.
Note Saving to Phonebook • If URL is selected, USIM is unselectable in Step 1. AIn Message window, select a phone number, mail address, or URL and Saving as a Bookmark select Add to phonebook Phone or AIn Message window, select a URL and USIM select Bookmark BCreate a new entry or update an...
To initiate a Voice Call Using an Attachment Select a phone number and select Voice call To initiate a Video Call Viewing an Attachment Select a phone number and select Video call Open images/play sounds attached to S! Mail. For vCard/ To send a message vCalendar, open Details to see contents.
To select and save multiple files • When a file requiring Content Key is attached aMenu Multiple After Step 1, a message appears and file does not open. To view the file, select Save items in Step 1 to save and bCheck the files to save purchase/obtain Content Key from Data Folder ( P.11-13).
Managing Folders Security ON/OFF Activate Security to require Phone Password entry to open Create personal folders in Received msgs; organize a personal folder. messages by message type. Activate Security for personal folders. APress w and select Received msgs BHighlight the personal folder, select Create Folder Menu Security ON/OFF...
Moving Messages Delete Folder APress w and select Received msgs APress w and select Received msgs To move messages from personal folder BHighlight the personal folder, select Select a personal folder Menu Delete folder BHighlight message, select Menu CEnter Phone Password and press Move this c (Confirm) CSelect the destination folder...
CSelect a phone number or mail Sorting Messages address and select Phone or USIM Available sorting types vary by Mailbox/Message list. DSelect saving method to create a new AIn Message list window, select Menu entry or update an existing entry Sort by To save as a new entry BSelect an item...
To view messages separately by type Move to Phone/Move to USIM Select Message type Move received SMS or sent SMS. To sort by subject Save up to ten messages to USIM Card. Select Subject APress w and select Received msgs To sort in descending order of message size Select Size or Sent msgs...
CSelect Subject field or Text entry field and enter a subject or message • Message List SMS Indicators : Unread SMS DPress w (Save) : Read SMS : Unread SMS (USIM Card) : Read SMS (USIM Card) : Sent SMS : Sent SMS (USIM Card) •...
Item Description • To change font size a In Step 3, select Text entry field, select Menu Font Move received mails to a personal folder Move this Size ( P.18-16). b Select any of Small, Standard, or Large Create folder Create a personal folder ( P.18-15).
Page 312
Item Description Cancel retrieving Stop message retrieval from Mail Server. Send message using S! Mail template or Send SMS template ( P.17-14). Save a new S! Mail template or SMS Add new template ( P.4-15, 18-19). 18-21...
Message List Download APress w and select Server mail box View Mail Server message list. Retrieve, forward, or delete messages. BSelect Mail List Acquire Mail List CHighlight the message, select Menu APress w and select Server mail box Download BSelect Acquire Mail List •...
To delete multiple messages Delete aMenu Delete Multiple APress w and select Server mail box bCheck a message to delete cRepeat b to check all target messages to delete BSelect Mail List dPress w (Delete) and go to f if unmarking CDelete unwanted messages eEnter Phone Password and press c (Confirm) To delete one message...
DEnter an address Remote Forward To directly enter an address Forward a message from the Mail Server to another aSelect Entry field and select Enter Recipient address. Contents except the address are sent without bEnter a phone number or mail address modification.
Page 318
• Message subject Forwarded message Subject is automatically prefixed with "FW:". • To set other sending settings for a message a In Step 5, select Menu Sending options b Select an item and perform operations to set ( P.20-2) c Press w (Apply) •...
APress w and select Settings Customizing Handset Mail Sending options Address BSelect an item and set Change your mail address (alphanumerics before @) used for sending and receiving S! Mail to/from PC, etc. The Message priority default account name consists of random alphanumerics. aSelect Priority bSelect a level and press c APress w and select Settings...
BSelect a received method To set the receiving method to use in Japan • When retention set in Expiration expires The S! Mail is deleted automatically from the Mail Server. aSelect Home network • When retention is set in Delivery bSelect an item and press c When the specified time has elapsed, the S! Mail is sent from To set the receiving method while overseas...
BSet settings Message Size Font color Default Setting 300KB aSelect Font colour bUse a to highlight a color and press c Cancel outgoing messages exceeding specified size. To set a font size APress w and select Settings aSelect Font Size Mail Message size bSelect an item and press c...
SMS Settings • When Delivery report is checked When an SMS is sent from the Mail Server, a delivery report Default Setting Delivery report: Unchecked is sent to your handset. Character support: Automatic Set Sending settings. Alternatively, set settings for each 3D Pictogram Settings SMS to send ( P.17-11).
BSet settings Note Whether to use 3D Pictogram • Mail attachments, such as slide shows, may not appear properly in 3D Pictogram. aSelect Display type bSelect an item and press c (Save) Reply with text Background and font colors aSelect Background Default Setting bPress s, display the pattern and press Activate to include original message text in Reply.
SSL/TLS Precautions Getting Started When a security notice appears, subscribers must decide for themselves whether or not to open the page. Opening secure pages constitutes agreement to the terms of usage. SOFTBANK MOBILE Corp., VeriSign Japan K.K., Betrusted Access Mobile Internet or Internet sites from 708SC. Japan Co., Ltd., and Entrust Japan Co., Ltd.
Getting Online Enter URL APress c and select Yahoo! Keitai Yahoo! Keitai Main Menu Enter URL Access Mobile Internet sites via Yahoo! Keitai main menu BSelect URL field and enter a URL APress o CPress w (Go to) BSelect an item •...
Side Key n: Scroll page up by multiple lines Page Window Operations Moving Cursor Operations on pages are as follows. When selecting an item such as link, move cursor to that Scrolling item. Scroll bar appears when page content extends beyond Cursor current view.
Page 330
• If w (Back)/C is pressed with no previous • When items are listed in the same row Press s to move cursor right or left. page displayed A message appears asking whether to terminate the Web • When you move cursor connection;...
Menu field Note Open a menu and select an item. Highlight a menu, press • Text entry and item selection varies by page. c to open it. Use j to highlight an item and press c to select it. If multiple items are selectable, press Using Linked Info C to cancel all.
Page 332
BSelect a number or address and select Using Page Links Save Number or Save Address AOpen a page containing linked info Phone or USIM BUse the available links CCreate a new entry or update an To initiate a Voice Call existing entry Select a phone number and select Voice Call To save as a new entry...
Saving Page Images Using Image Files Save a page image to Data Folder. Saving Images to Data Folder AOpen a page with an image Saving Linked Images BSelect Menu Save Save image Download and save images from page links. CHighlight the image and press AOpen a page containing an image link c (Save) BSelect link...
Using Set As • If the same file name exists Set current image as Wallpaper, Phonebook entry image or a Press c (Edit) and change the file name Video Call Substitute Image. b Press w (Save) • Viewing images AOpen image ( P.22-2) Press w (Set as) to set Wallpaper.
Note Saving Sounds to Data Folder • For SVG-T/SWF format file, Settings does not appear. Download sound files from page links and save them to For Wallpaper, open Data Folder and open an image Data Folder. ( P.11-8). AOpen a page containing a sound link Using Sound Files BSelect link Playing Sound...
Page 338
Using Save Sound • If same file name exists Save background sound while viewing a page. a Press c (Edit) and change the file name AOpen a page with sound b Press w (Save) • To play sounds BSelect Menu Save Save sound Press w (Set as) and set saved sound as Ringtone...
To play video Using Video Files Press c (Launch) To set saved video as Ringtone Playing a Video Press w (Set as) and perform Step 3 in "Setting Play video from a page link. Video File as Ringtone" ( P.11-11) AOpen a page containing a video link BSelect link •...
Item Description Note Access a page containing a streaming • Even if streaming is paused, data transfer continues View history play link already accessed. and packet transmission fees apply. Details Set video size while playing or paused. Menu Select settings related to Media Player Player settings Selectable menu content varies by file.
Saving Pages Changing a Title APress c and select Yahoo! Keitai Saving a Page Saved pages Save current page to open it at any time without accessing BHighlight a page, select Menu the Web. Save up to 50 pages. Rename AOpen a page CPress c (Edit) and change the name BSelect Menu...
Deleting a Saved Page • To select/deselect multiple pages at once APress c and select Yahoo! Keitai a In Step 2, select Menu Delete Multiple b Menu Selected/All Saved pages BDelete as required Saving Bookmarks To delete one page Saving as a Bookmark aHighlight a page bMenu Delete...
CConfirm title and URL To change the title/URL • To send a bookmark URL via S! Mail a In Step 2, highlight a bookmark, select Menu Send aSelect Title or URL field bChange a title or URL b Create a message and press w (Send) DPress w (Save) Editing Bookmarks Modify the title or URL of bookmark.
Deleting a Bookmark • To select/deselect multiple bookmarks at once APress c and select Yahoo! Keitai a In Step 2, select Menu Delete Multiple b Menu Selected/All Bookmarks BDelete as required History To delete one bookmark Holds up to 50 page URLs; open previously viewed pages. aHighlight a bookmark APress c and select Yahoo! Keitai bMenu...
To delete multiple histories Display Settings aMenu Delete Multiple bCheck a record to delete Rendering cRepeat b to check all target histories dPress w (Delete) and select Yes Default Setting Standard To delete all records Set pages to match Display size or show only text. aMenu Delete AOpen a page...
DUse a to move cursor on the first Search Text character and press c (Start) AOpen information window To copy all texts in text entry window Press o (All) to copy BSelect Menu Search text EUse a to specify the range and CSelect Text entry field and enter text press c (End) DSelect search direction and press...
Page Details Server Certificate View current page information including URL and Title. View SSL/TLS server certificates. AOpen a page AOpen a secure page BSelect Menu BSelect Menu Browser setting Browser setting Page details Certificates CSelect Server certification and select a Send URL certificate Attach current page URL to a message and send it.
Returning to Default Page Information Window Menu Return to the Yahoo! Keitai main menu. Item Description AOpen a page Move to the next information window Forward ( P.21-5). BFrom any page, select Menu Bookmark Add or open bookmarks ( P.22-9). Save information windows to Saved pages.
Page 349
Item Description Item Description History Access previously viewed pages ( P.22-11). Java Script Turn Java Script on off ( P.23-3). Return to the Yahoo! Keitai main menu About Yahoo! Keitai View browser details. ( P.22-15). browser Browser setting Adjust Web Browser settings. Adjust information window text size Text size ( P.23-3).
Preferences Security Default Setting Display images: Checked Cookie Options Play sound: Checked Default Setting Accept all Set 708SC to disable embedded images/sounds when opening pages. Pages download more quickly without Allow or reject small data files created by Web servers and image and sound data.
Turning Java Script On/Off Manufacture Number Default Setting Default Setting APress c and select Yahoo! Keitai Set 708SC to automatically send handset serial number to Websites upon request for user identification. Browser settings Java script APress c and select Yahoo! Keitai BSelect an item and press c (Save) Browser settings Manufacture...
Refresh Browser Certificates View electronic certificate saved on 708SC. Empty Cache/Empty Cookies AOpen a page using SSL/TLS Delete information saved in Cache and Cookies. BSelect Menu Browser setting APress c and select Yahoo! Keitai Certificates Browser settings CSelect Root certificate to view the BDelete as required certificate To delete Cache contents...
Main Menu Functions Item Page Item Take photo P.7-4 Main Menu Item Page Record video P.7-11 Item Go to photos P.7-5 Current contacts P.2-9 Camera Go to videos P.7-12 Missed calls P.2-9 Dynamic effect list P.7-19 Received calls P.2-9 Video editor P.7-18 Call log Dialled calls...
Main Menu Troubleshooting Item Page Item Alarms P.14-2 708SC does not turn on Calendar P.14-5 " Is battery empty? Voice recorder P.14-15 # Replace or charge battery. World clock P.14-17 " Is battery installed in 708SC? Calculator P.14-18 Tools Converter P.14-19 # Install battery correctly.
Page 357
Please insert USIM card or This card Reading USIM Cannot operate or Reading cannot be recognized appears when 708SC USIM Card Cannot start appears # USIM Card data is being read. Try again later. is turned on or executing a function "...
Page 358
appears and no calls can be Unable to open Phonebook entry, Data initiated Folder, Call Log, Calendar, or Messaging " 708SC is out-of-range. " Is Privacy lock set? # Move to a place where the signal is stronger # Cancel Privacy lock. and try again.
Page 359
" Are 708SC terminals and AC Charger clean? " Does 708SC or battery become very warm # Clean contacts with a dry cotton swab. during charging? # If the temperature rises too much, charging " Was battery charged in ambient temperature may stop.
Page 360
Battery drains quickly Unable to play music through speaker " Battery may drain quickly depending on the " Is Manner Profile set? # Cancel Manner Profile. operating environment (Ambient temperature, " Is the stereo earphone microphone charging conditions, or Signal Strength), operations, and settings.
Page 361
Unable to establish Bluetooth or USB or PC USB connection port connections using Samsung PC Studio and Samsung PC Studio settings the same? " Is the USB driver installed? (for USB # Make sure port settings match those set for connection)
Page 362
Try again appears No response appears " Signal conditions are poor. " Network/Server is busy. # Move for a stronger signal and try again. # Try again later. Sending message failed or Unknown error Change from flight profile to other profile appears for network service, created message will be "...
EPress c Software Update To update immediately Check for 708SC software updates and download as Select Update now to start the update. When required. Choose to begin Update or Schedule update. completed, 708SC turns the power off and on again; APress c and select Settings then Notification window appears.
Page 364
Note • Procedures • Charge battery beforehand; if low, update may fail. Find details on SoftBank Website (http://www.softbank.jp). • If Scheduled update time arrives while 708SC is out- • Connection fees of-range, Software Update is canceled. No fees are applied to update checks or downloads. •...
Pictograms • Pictograms with are animated. • Some pictograms and animated pictograms may not appear properly on some models of SoftBank handsets or other devices. 24-13...
Memory List Specifications 708SC specifications may change without prior notice. Shared Memory Received msgs Up to 500 messages SoftBank 708SC Drafts Up to 10 messages S! Mail Unsent msgs Up to 10 messages Item Specification Sent msgs Up to 250 messages...
Page 368
• Battery Time is calculated by SoftBank under stable Battery signal conditions. Calling in poor signal conditions or leaving 708SC on out-of-range will consume more Item Specification power and may reduce Battery Time by more than half. Voltage 3.7 V •...
Attaching to a message for sending Call cost limit ...........2-13 INDEX still images Call Log Records ........... 7-22 ........2-9 Attaching to a message for sending Call Transfer service ......16-3 videos ...........7-22, 11-13 Call Waiting ..........16-8 Attaching/Inserting a file ....17-14 Caller ID ............16-13 AC Charger...
Page 370
Changing settings of each profile Copying items Deleting characters ......... 5-13 ......4-11 Copying Phonebook Deleting Cookies ................9-2 ......5-15 ........23-4 Changing to SMS Copyrighted file icons Deleting messages .........17-11 ......18-5 .......18-9 Changing to S! Mail Country code Deleting messages in server ......17-11 ...........
Page 371
Entering URL Icons for files ..........21-3 ......... 11-2, 11-4 Entry mode for characters Icons on Drafts list ....4-2 .......18-4 Earphone call Event list Icons on My devices list ...........15-3 ..........14-12 ....12-6 Editing bookmarks External Device Port Icons on Received messages list ......22-10 ......
Page 372
® Manner profile My phone’s visibility for Bluetooth .......... 3-2 Mark default number ..............12-10 ......5-14 Java Script Mass storage ..........23-3 ......... 12-13 Jump Maximum of message size ..............4-13 ....20-4 Media Player ..........10-2 Network mode ........2-13 Memo ............14-10 Network password ....
Page 373
Password Lock Privacy Lock Registering as S! Mail Template .........13-5 ..........13-6 Pasting characters Providing Manufacturer Number ..............18-6 ........4-12 Registering SMS templates Phone lock ..............23-3 .....4-15 ..........13-5 PUK Code Registering to bookmark Phonebook search ..........1-5, 13-3 ....22-9 ........5-9 Putting a call on hold Registering to Phonebook Photo slide ......
Page 374
® Sending videos via Bluetooth Speaker Phone call .........2-7 Speed dialing .............7-12, 12-6 ...........5-12 Sending your image Saving a page SSL/TLS ......6-5 ..........22-8 ............21-2 Sent messages Saving as a template SSL/TLS certificate ........18-2 ......17-20 ........23-4 Server Certification Saving attached files Still image details ......
Page 375
USB connection Viewing Saved Calendar Entries ........12-11 User dictionary ..............14-12 ........4-14 Viewing your phone number USIM Card ............1-2 (My Phonebook details) USIM lock ....5-16 ...........13-4 Visualization USIM password ..........10-8 ........13-5 Voice Mail Service Using a file ........ 16-5 ..........11-10 Voice Recorder Using a template...
• During the warranty period, repairs will be made under Warranty & After Sales the terms and conditions described in the warranty. Service • After the warranty period, repairs will be upon request; if said repairs can be made, you will be charged for Warranty them.
Customer Service For SoftBank handset or service information, call General Information. For repairs, please call Customer Assistance. SoftBank Customer Center SoftBank International Call Center From outside Japan, dial +81-3-5351-3491 From a SoftBank handset, dial toll free at 157 for General Information or (Please take care to dial correctly.
*Mobile phones, batteries, and chargers collected for recycling cannot be returned. Model name: SoftBank 708SC *To protect your privacy, delete any personal Manufacturer: Samsung Electronics information (telephone numbers, call log records, messages, etc.) beforehand.