Text Entry Window - SoftBank 706N User Manual

Entering Characters
Chinese characters (Kanji), Hiragana, Katakana (single-byte/double-byte),
alphanumeric characters (single-byte/double-byte), symbols (single-byte/
double-byte), pictographs and emoticons can be entered. Some entry
modes may be unavailable on some windows. In some cases you may be
unable to switch between single-byte and double-byte, enter a space or
3
break a line.
The text entry operations vary depending on the Input Mode. This chapter
mainly describes how to enter in Mode1(Kana) set at purchase. To
enter in Mode2(2-touch) or Mode3(T9), see Changing Input Mode
(zp.3-13).

■ Text Entry Window

Text Entry Area
: Cursor
3-2
Text Entry Area
Operation Guidance
Text Entry Indicators
Operation Guidance
Use j to convert characters.
CHG
Fix Mode/ Fix Mode is available in Mode3(T9).
Fix End
Press n to toggle upper/lower cases.
/
Press n for 1+ seconds to enter a line feed (
LF
Press < to return to the previous character assigned to
Back
the same key when the Input Mode is
Mode1(Kana) and you are entering Japanese.
Text Entry Indicators
/ Indicates Mode2(2-touch)/Mode3(T9). (Does not
appear in Mode1(Kana).
Indicates Fix Mode in Mode3(T9).
/ Indicates Insert mode or Overwrite mode.
/
( )/ Indicates the current entry mode.
/
Indicates Kuten entry mode.
/ Indicates Single-byte mode/Double-byte mode. Single-
byte characters cannot be entered in Kanji/Hiragana
entry mode.
).