SoftBank 706N User Manual page 25

Battery Screw
Compartment
Shield Cover
Battery Terminal
Printed Wiring Board
USIM Lock
USIM Slot
microSD Slot
Battery Outer Package (laminated part)
Outer Package (plastic part)
Terminals
Do not leave the handset for long periods of time in
a place where bright light enters the camera lens.
Light entering through a lens is concentrated and may cause
fire or equipment failure.
Take care not to pinch your finger in the hinge when
you open the handset. This may cause injury.
Watch out for broken glass if the display or camera
lens is damaged. The surfaces of the display and camera
lens are covered by plastic panels so as to minimize the
possibility of glass scattering. However, touching the broken
display or camera lens may cause injury.
xxiv
Part Material
Steel
Stainless
Phosphor bronze
epoxy resin
Polyacetal resin
30%GF-LCP resin/SUS
30%GF-LCP resin/SUS
Aluminium
PP resin, PC resin
Copper
If the display is broken and the liquid crystal leaks,
do not lick or inhale the liquid or get the liquid on
your skin. If the liquid comes into contact with your
eyes or mouth, immediately rinse your eyes or mouth
with clean water and see a doctor. If the liquid comes into
contact with your skin or clothes, immediately wipe it off with
alcohol, and wash with water and soap. This liquid may cause loss
of eyesight or skin problems.
Surface finish
Nickel plating
ー
Gold plating
glass epoxy
ー
ー
ー
PET
ー
Gold plating