Table of Contents
Advertisement
■ Activating Bluetooth
When receiving Phone Book data or connecting to a Bluetooth device in
the vicinity, activate Bluetooth to enable connection. While in Bluetooth
standby mode,
appears in the window.
A Press c and select
Connectivity → Bluetooth
B Select Discoverable
Tip
• A connection cannot be established until the Bluetooth function is
activated.
• The timeout time can be set in Standby Timer under Timeout Settings.
If a connection is not established within the specified time, the
connection standby mode is canceled, and
window.
■ Pairing
Search for a Bluetooth device and register it. Register a headset or
handsfree device beforehand. Up to 20 devices can be registered.
(Settings) →
disappears from the
Pairing
A Press c and select
Connectivity → Bluetooth
B Press y (SEARCH)
C Select a device from the search result
D Enter the Device Passkey
E Enter the same Device Passkey on the pairing
device
Tip
• The common Device Passkey (authentication code) must be entered
on both sending and receiving devices. Set a 16-digit-or-less number
as the Device Passkey. The available digits may vary depending on the
devices.
• If the Device Passkey has been set on the device to register, enter it.
• If connecting to a registered device, the Device Passkey is not
required.
• For information on setting the device to standby, see the device's
user guide.
(Settings) →
11-3
11
Advertisement
Table of Contents
