SoftBank 706N User Manual page 121

Tip
• To use Auto Timer
Press M (OPTIONS) and select → Auto Timer → On(10sec). Press c to
shoot an image in 10 seconds. To cancel the shooting, press y (CANCEL).
• To switch between the internal and external cameras
Press M (OPTIONS) and select Camera Direction while the camera is
activated.
• To zoom in or out
Use s to zoom in or out by one level (Eight levels are available, except 1600 x
1200).
• To adjust brightness (exposure)
Use j to set the level (+2, +1, 0, -1 or -2).
• To set a captured image as wallpaper
After shooting, press M (OPTIONS) and select Wallpaper.
• To switch from Picture mode to Video mode
Press y (VIDEO) which in Picture mode.
• To reduce window flicker
A window may flicker due to fluorescent light, etc. Press M (OPTIONS) and
select Camera Settings → Image Tuning → Mode 1 (50Hz) or Mode 2
(60Hz) to adjust flicker.
• To rename a file
After shooting, press M (OPTIONS) and select Rename.
• To shoot successively
After shooting, press c.
! OPTIONS menu available before image capturing
To use the OPTIONS menu listed below, press M (OPTIONS) while the camera is
activated. Available menu items vary depending on the specified mode or settings.
Option
Image Viewer Activate Image Viewer.
Camera Direction Switch between the internal and external
cameras.
Display Settings Select an image size.
Picture Quality Select an image quality mode.
White Balance Select a mode suitable for light to adjust the
image color.
Night Mode On Set to On for shooting at night or in a dark place.
(Night Mode Off)
Auto Timer Use Auto Timer.
Camera Settings ・Memory Status
Display available memory capacity, the number
of images that can be saved.
・Display Settings
Select to display an image at the same
magnification or enlarge it to the size suitable
for Display.
・Shutter Sound
Select from three types of sound.
・Image Tuning
Change the setting to reduce window flicker.
Bar Code Reader Activate Bar Code Reader (zp.6-8).
Description
6-5
6