Table of Contents
Advertisement
■ Checking Total/Previous Call Time & Cost
Check total call time and costs or the previous (last) call time and cost.
A Press c and select
Settings → Common Set. → CalTim/TolInf → Call
Duration or Previous Call
B Check the contents
Tip
• The limits of time and cost to be displayed
Up to 999 hours 59 minutes and 59 seconds for call time and up to 9,999,999
yen for call cost can be displayed. Time and costs exceeding the limits remains
"999 :59 : 59" and "9999999 yen".
Note
•
Ring time for incoming or outgoing is not counted in the call time/
cost. However, on hold time is counted.
•
The displayed call time and cost are intended as an approximate
guide and may differ from the actual time and costs.
•
When using the Multi-Party Call service (zp.15-8), the combined
total call costs are displayed.
•
When making a call outside Japan, the costs may be included in Call
Duration or Previous Call.
(Settings) → Call
! Guide to the call time and cost
Call Duration shows the total call time and cost from the previous reset to the
latest. Previous Call shows the previous call time and cost.
■ Setting Maximum for Call Cost
Limit outgoing call cost by setting maximum cost. When your total call
cost reaches the set limit, a notification appears after call ends. Once the
limit is reached, all outgoing voice/video calls are unavailable, except
emergency calls.
Setting a Limit
A Press c and select
Settings → Common Set. → CalTim/TolInf →
CallUpLimitSet
B Press M (CHANGE)
C Enter PIN2
D Press M (OK) or #
E Enter the limit for call costs and press M (OK)
(Settings) → Call
2-11
2
Advertisement
Table of Contents
