Pc Connection; Usb Driver; Data Transfer; Setting Usb Mode - SoftBank 940N User Manual

Connect handset to a PC via USB cable to use
the following functions.
USB cable is sold separately.

Data transfer*

Transfer Phone Book,
Schedule and To Do List
data between handset and
a PC (P. 13-9).
USB memory Use memory card inserted
in handset as an external
drive of a PC to read and
write data with memory
card (P. 13-9).
MTP Mode Use Windows Media
Player to save music data
to memory card (P. 9-4).
* USB driver must be installed in advance.

USB Driver

Install USB Driver to connect handset to a PC.
Download USB Driver from the following site
(Japanese).
http://www.n-keitai.com/guide/download/
Data Transfer
Use SoftBank Utility Software to transfer
data between handset and a PC. Download
SoftBank Utility Software from the following
site (Japanese).
http://www.n-keitai.com/guide/download/
Install USB Driver before using SoftBank Utility
Software.

Setting USB Mode

Set USB mode before connecting handset to
your PC via USB cable.

i
1 
Settings

Connection
d

Setting
2
Communication Mode or
microSD Mode
Set to Communication Mode for using
SoftBank Utility Software or using
handset as a modem (packet
transmission).
Set to microSD Mode for accessing
memory card data from a PC.
Accessing Memory Card
Data from a PC
Connect handset to your PC using a USB
cable, and access memory card data from the
PC.
Set USB Mode Setting to microSD Mode in
advance.
1
Connect handset to your PC using
a USB cable
This enables memory card data to be
accessed from your PC.
2
When you are finished, disconnect
d
 
External
handset from the PC
d

USB Mode
Follow the procedure for safely
removing external devices (which differs
slightly according to the operating
system), when disconnecting handset
d

from the PC.

PC Connection

13
13
-9