Text Entry Modes - SoftBank 706N User Manual

Text Entry Indicators
/ Indicates the case mode.
* The number of remaining bytes or characters that can be entered appears on the
right side of Text Entry Indicators. One single-byte alphanumeric character uses
one byte, one double-byte character or single-byte katakana uses three bytes,
and one line feed uses two bytes.
! Text entry/edit interrupted
When a call is incoming during text entry, press n to answer it. Press p to
end the call, and the window returns to the text entry. If Calendar or another alarm
is activated, end the alarm to return to the text entry window.
When p is pressed during text entry, a message appears asking
whether to end the entry. If it is OK to discard the contents, press M
(YES).
! Invalid characters
Valid characters may vary depending on the situations. Invalid characters are
converted to spaces or deleted.

■ Text Entry Modes

Changing Entry Modes
Press y (CHARS.) to cycle through entry modes.
Kanji/Hiragana
Enter Kanji, Hiragana, Katakana,
symbols and numbers.
Katakana
Enter Katakana and symbols.
Alphanumerics
Enter alphabets, numbers and
symbols.
Numbers
Enter numbers and symbols.
3-3
3