Table of Contents
Advertisement
OSD Menu Setting
E-3. PAN/TILT
If you press the Focus Far Key after place Cursor to Menu,
showed up on the left and can set up the position, zoom you want.
And then get out of there pressing the Focus Far Key after completing
setting. That time,
E-4. FREEZE MODE
On moving on relevant CALL when CALL set, it can be set up
whether
display move to Freeze, on On, Freeze CALL can be vitalized.
E-5. FREEZE ALL
Set up the ON/OFF, on ON, Freeze CALL can be vitalized to all of CALL.
E-6. SAVE
It's used to save the value set after setting is completed and can be saved
anything using Left/Right of Joystick
F. AUTO SCAN
You can get in the AUTO SCAN using Left/Right of Joystick after decision AUTO
SCAN from Main Menu.
should be taken out.
AUTO SCAN SET
START ANGLE
: 250.5 35.0
END ANGLE
: 320.0 35.0
DIRECTION
: CW
ENDLESS
: OFF
SPEED
: 10º/S
DWELL TIME
: 01
SAVE AND EXIT
EXIT
023
IR PTZ CAMERA
sign would be
Advertisement
Table of Contents
