Table of Contents
Advertisement
Trouble Shooting
If you have trouble operating in your camera, refer to the following.
NO OPERATING
Check if the power supply is AC24V
Check if RS-485 communication cable is connected correctly.
Check camera ID setting.
Check the termination.
NO PICTURE
Check if all the cables are connected correctly.
Check the monitor is adjusted correctly.
Check if video signal line is cut.
DARK SCREEN
Adjust the monitor status.
ADNORMAL CAMERA OPERATION STATUS
Check if the voltage level is out of the specification.
Check the termination.
SCREEN NOT CLEAR
Check if there is dust on a lens.
Adjust the monitor status.
if excessive light is seen on a screen, change the camera angle or location.
Adjust the lens focus again.
038
PTZ CAMERA
Advertisement
Table of Contents
