Sector - Veilux IR PTZ VP-60IR Series User Manual

OSD Menu Setting
K. SECTOR
This is for sign the TITLE on the screen on sprecial section to get in using LEFT/
RIGHT of JOYSTICK after choose the SECTOR in the Main Menu.
K-1. SECTOR NO.
You can design the SECTOR 8 in total using Left/Right of Joystick.
K-2. SECTOR ID
This is for inputting words for TITLE and will be marked on the screen on

SECTOR.

-Default is "SECTOR1
- You can set up the changing of character using Left/Right/Up/Down or
Zoom in/Out of Joystick.
K-3. SECTOR START
Design the START position of SECTOR section to work.
- Enter it as designed MODE by pressing FOCUS FAR.
- Move on position as you want to go using PAN/TILT/ZOOM.
- The designed MODE should be over by pressing the FOCUS FAR Key after
design of position is completed.
K-4. SECTOR END
Design the END position of SECTOR section.
- Enter the place as designed MODE by pressing the FOCUS FAR key.
- Move on the position as you want to go using the PAN/TIRL/ZOOM.
K-5. SAVE
It's used to save the set SECTOR value.
K-6. EXIT
It's used to take off the SECTOR SET Menu.
SECTOR SET
SECTOR NO. : 01
SECTOR ID : SECTOR1
SECTOR START : 334.7 -1.6
SECTPR EMD : 000.4 08.8
SAVE
EXIT
".( is blank)
030
PTZ CAMERA