Mitsubishi Heavy Industries FDTC50ZHXV Technical Manual page 247

4) Press or button. (selection of louver No.)
Select the louver No. to be set according to the right figure.
[EXAMPLE]
" ⇔ "
"
" "
• For FDTC series, set louver No.1 other settings selected have no effect.
5) Press SET button. (Determination of louver No.)
The louver No. to be set is confirmed and the display shows the upper limit of the movable range.
[EXAMPLE] If No.1 louver is selected,
" " current upper limit position
6) Press or button. (selection of upper limit position)
Select the upper limit of louver movable range.
"position 1" is the most horizontal, and "position 6" is the most downward.
"position --" is to return to the factory setting. If you need to change the setting
to the default setting, use "position --".
"
⇔ "
⇔ "
⇔ "
⇔ "
⇔ "
⇔ "
7) Press SET button. (Fixing of the upperlimit position)
The upper limit position is fixed and the setting position is displayed for two seconds.Then proceed to lower limit position
selection display.
[EXAMPLE]
(displayed for two seconds)
(shows current setting)
8) Press or button. (Selection of lower limit position)
Select the lower limit position of louver.
"position 1" is the most horizontal, and "position 6 " is the most downwards.
"position --" is to return to the factory setting. If you need to change the setting to the default setting, use "position --".
(the most horizontal)
(the most downwards)
(return to the default setting)
9) Press SET button. (Fixing of the upper limit position)
Upper limit position and lower limit position are fixed, and the set posi-
tions are displayed for two seconds, then setting is completed.
• After the setting is completed, the louver which was set moves from the
original position to the lower limit position, and goes back to the origi-
nal position again. (This operation is not performed if the indoor unit
and/or indoor unit fan is in operation.)
[EXAMPLE]
" ⇔ "
" (the most horizotal)
"
"
"
"
" (the most downwards)
" (return to the default setting)
(displayed for two seconds)
-
" ⇔
238
-
(horizontal)
(downwards)
the position of the louver
Upper
position
Movable
range
Lower
position