Circuit Breaker Protection; 斷路器保護裝置 - Panasonic MX-151SG2 Operating Instructions Manual

Circuit Breaker Protection

斷路器保護裝置
If the motor is subjected to an excessive load, its protection device is tripped, shutting down
the motor automatically. It is reset by taking the steps described below.
如果馬達承載的負荷過大，便會啟動其保護裝置，自動使馬達停止操作。
您可以採取下列所述的步驟來重新啟動馬達運轉。
1
Set the selector knob to the "0" position.
將選擇器旋鈕設至「0」的位置。
2
Reduce the amount of the ingredients inside the container by half.
將容器內的材料量減半。
3
Set the selector knob to the "1" or "2" position.
• If the rotating parts fail to rotate, re-assemble the parts, and then set the selector knob from
將選擇器旋鈕設至「1」或「2」的位置。
• 如果旋轉部件無法旋轉，請重新組裝部件，然後將選擇器旋鈕從「0」設至「2」的位置。
0_MX-151SG1-050.indd 15
"0" to the "2" position.
15
2010/05/24 11:31:16