Panasonic MX-151SG2 Operating Instructions Manual page 17

Containers and plastic parts
容器和塑膠部件
Wash the parts using a soft sponge soaked in diluted
kitchen detergent (neutral). To remove ingredients
stuck in the cutter, carefully clean it with a brush.
Then rinse thoroughly with water, and allow the parts to
dry out.
清洗部件所用的軟海綿，需以稀釋過的中性廚房洗滌劑
浸濕。 若要清除卡在切削刀上的材料，請以刷子小心清
潔。
然後以清水徹底沖洗，再將部件晾乾。
0_MX-151SG1-050.indd 17
Mill Cutter
碾磨刀
Carefully clean mill cutter with a brush. Do not use
water.
使用刷子小心清潔碾磨刀，請不要沾水。
Motor housing
本體
Wipe with a well wrung-out cloth.
以扭乾後的布進行擦拭。
17
2010/05/24 11:31:16