Daily Use; How To Navigate - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210 / 310, application A231 / A331

3.0 Daily use

3.1 How to navigate

You navigate in the controller by turning the dial left or right to
the desired position ( ).
The dial has a built-in accellerator. The faster you turn the dial, the
faster it reaches the limits of any wide setting range.
The position indicator in the display ( ) will always show you where
you are.
Push the dial to confirm your choices ( ).
The display examples are from a two-circuit application: One
heating circuit ( ) and one domestic hot-water (DHW) circuit ( ).
The examples might differ from your application.
Some general settings which apply to the entire controller are
located in a specific part of the controller.
To enter 'Common controller settings':
Action: Purpose:
Choose 'MENU' in any circuit
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
VI.LG.P2.02
Example shows ECL 210 / 310
Heating circuit ( ):
Examples:
DHW circuit ( );
Circuit selector
© Danfoss | 2017.11 | 41