Installation Instructions; Product Specifi Cation - Danfoss FP715 Installation & User's Instructions

Installation Instructions

Please Note:
This product should only be installed by a qualifi ed
electrician or competent heating installer, and
should be in accordance with the current edition of
the IEEE wiring regulations.
Product specifi cation
Specifi cation
Power supply
Switching action
Switch rating
Battery back-up
Programme resolution
Dimensions, mm (W, H, D)
Design standard
Control Pollution Situation
Rated Impulse Voltage
Ball Pressure Test
230 Vac, ±10%, 50/60 Hz
2 x SPDT internally linked, Type 1B
230 V ac, 3(1)A
24 hours minimum
1 minute
135 x 88 x 32
EN 60730-2-7
Degree 2
2.5kV
75°C
3