Install The Wheel Pants And Fairings - GREAT PLANES Waco YMF-5 Instruction Manual

Install the Wheel Pants and Fairings

❏
1. Install the left and right wheel pants using four 4-40x1/2"
[12.7mm] SHCS, #4 lock washers, and four #4 flat washers.
❏
2. Install the rear cockpit windscreen and the turtledeck
fairing using R/C-56 canopy glue. Tape them in place until
the glue cures. Note: You can poke pin holes through the
covering to help improve adhesion.
❏
3. Install the wing fillets using R/C-56 canopy glue.
❏
4. Using R/C-56, glue the wing bolt backing plate to the
wing. Then, install the bottom wing using the two nylon
wing bolts. Hold the top of the fillets in place up against the
fuselage with tape until the glue dries.
❏
5. Install the belly fairing to the bottom wing using R/C-56
canopy glue. Tape it in place while the glue dries.
31