Motion Seq Step Type (Lane Motion Sequencer Step Type); Pulse A / Pulse B (Lane Motion Sequencer Step Curve Type); Direction (Lance Motion Sequencer Step Curve Direction); Prm1/Prm2 (Lane Motion Sequencer Step Curve Parameter) - Yamaha Montage 7 Reference Manual

Reference
Performance

Motion Seq Step Type (Lane Motion Sequencer Step Type)

Determines each Step Type of the Motion Sequence. You can switch between the Step Types A and B for
the Step 1 – 8 or 9 – 16 by the SCENE [1] – [8] buttons depending on the cursor position on the display.
Settings:
A, B

Pulse A / Pulse B (Lane Motion Sequencer Step Curve Type)

Determines the Curve Type of the parameter for each of "Pulse A" and "Pulse B." "Motion Seq Step Type"
described above determines which curve set here is used for each step.
Settings:
For Preset Bank: Standard, Sigmoid, Threshold, Bell, Dogleg, FM, AM, M, Discrete Saw, Smooth Saw, Triangle,
Square, Trapezoid, Tilt Sine, Bounce, Resonance, Sequence, Hold
For details, see the Synthesizer Parameter Manual PDF document.
For User Bank: User 1 – 32
When a Library file is read: Curves in Library 1 – 8

Direction (Lance Motion Sequencer Step Curve Direction)

Determines the Direction of the Step Curve for the Motion Sequence.
Settings:
Forward, Reverse

Prm1/Prm2 (Lane Motion Sequencer Step Curve Parameter)

Adjusts the shape of the Step Curve for the Motion Sequence.
This parameter is not available depending on the Curve Type. Also the range of available parameter
values differs depending on the Curve Type.
Control (Lane Motion Sequencer Step Curve Shape Control Switch)
Determines whether or not to control the shape of the Step Curve for the Motion Sequence by operating
Knobs. This parameter is displayed only when "MS FX" is set to on. Also this parameter is not available
depending on the Curve Type.
Settings:
Off, On
Store Sequence
Stores the edited Sequence data. For details about storing data, see "Store/Save"
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
(page 176).
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
84